80I-110S電流鉗FLUKE 80I-110S交/直流電流鉗美國福祿克FLUKE
AC/DC Current clamp
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter
80I-110S電流鉗FLUKE 80I-110S交/直流電流鉗美國福祿克FLUKE
購買須知：
1.請您先確定產品的具體型號。
2.如果不確定型號，可以參考我們頁面上提供的詳細介紹或者直接咨詢我們。
3.網頁上的價格僅作參考，準確價格請電聯我司。
4.貨期方面請與我司，因為不同產品的貨期是不一樣的。
5.同一產品不同時間的價格與貨期也是不一樣的
6.其他的具體相關事宜，請。
7.謝謝您的光臨！
概述：
AC/DC Current clamp
The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.
Current Range: 0.1 to 100A DC or 0.1 to 70A AC
Basic Accuracy (DC to 1kHz):
100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA
10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA
40A to 80A +/- 12% of reading + 50mA
80 to 100A +/- 15% of reading
Output Signal: 10A range: 100mV/A | 100A range: 10mV/A
Bandwidth: 1Hz to 20kHz
Working Voltage: 600V AC rms
Maximum Conductor Size: 11.8 mm (.46 inch) diameter
Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
80I-110S電流鉗FLUKE 80I-110S交/直流電流鉗美國福祿克FLUKE
型號和配件：
技術指標：
| Specifications |
| Nominal current range | |
| Continuous current range | | | 0.1 A - 10 A AC/DC | | | 1 A - 100 A AC/DC |
|
| Maximum Non-Destructive Current | |
| Lowest measurable current | |
| Basic Accuracy | | | 3% + 50 mA (@ 10 A) | | | (% reading + floorspec) |
|
| Useable frequency | |
| Output level(s) | |
| Zero error adjustment | |
| Safety Specifications |
| Safety | | | CAT II, 600 V | | | CAT III, 300 V |
|
| Maximum voltage | |
| Mechanical & General Specifications |
| Warranty | |
| Battery Life | |
| Maximum conductor diameter | |
| Output cable length | |
| BNC Adapter | |
所有評論僅代表網友意見，與本站立場無關。