遼寧恒潤石油化工有限公司是中國的工業化學品進口服務商，致力于為客戶提供高效便捷的服務，我司與國外70多家品牌生產商代理商建立長期的戰略合作伙伴關系，能夠快速幫助客戶解決實際問題保證、并且長期穩定為客戶儲備庫存，節約客戶等貨時間。涉及行業油：汽車行業、礦山行業、風電行業、紡織行業、石油開采、軌道交通、食品醫療、電子行業、船舶制造與維護保養、航空航天、電機軸承、潤滑系統、儀器行業。公司代理經銷品牌有：瑞士摩托瑞斯MOTOREX、尼科NYCO、克魯伯KLUBER、摩力克MOLYKOTE、魔力多MOLYDUVAL、科路德KLUTHE、福斯FUCHS、潘東興PENTOSIN、阿維亞AVIA、安潤龍ANDEROL、亞拉ARAL、雪弗龍Chevron、赤士頓CHESTERTON、LE、勞勃抗LUBCON、好富頓HOUGHTON、嘉實多Castrol、魔力大MOLYDAL、羅哥ROCOL、凱密特爾Chemetall、等品牌潤滑油、潤滑脂、防銹油、磨削液、切削液、鋰基脂等。
公司：

KlüberKlüberplexBEM41-141

KlüberKlüberplexBEM41-141

KlüberKlüberplexBEM41-141是一種用于承受高載荷的滾動軸承和滑動軸承的潤滑劑。

您的好處一目了然

- 由于寬的使用溫度，良好的可泵性以及通過集中潤滑系統進行計量，因此運行

- 由于在振動條件下具有良好的磨損保護特性，滾動軸承的使用壽命更長

- 由于良好的油脂分布和油分離，風力發電站的可靠性更高

低摩擦阻力和降低的部件溫度

- 由于潤滑性而減少磨損

- 易于轉換到KlüberplexBEM41-141，因為潤滑劑可與其他潤滑脂混溶

您的要求 - 我們的解決方案

KlüberplexBEM41-141具有良好的耐壓性和性，不含任何無機固體潤滑劑，如MoS2或石墨。由于其與商業密封材料的良好兼容性，該潤滑脂可用于的應用。

應用

KlüberplexBEM41-141專為風力渦輪機中的滾動軸承而設計。潤滑劑可用于風力發電站中轉子，發電機和變槳軸承的初始潤滑和潤滑。

因此，KlüberplexBEM41-141也可用于車輛橫向和縱向軸的等速萬向節以及受振動和振動影響的高負荷滾動軸承和滑動軸承。

應用筆記

KlüberplexBEM41-141可通過刷子，刮刀，油脂，油脂計量，自動少量或標準計量系統，油脂盒和集中潤滑系統進行施工。我們建議在實際操作條件下在原始配料裝置中進行計量測試。

Klüber Klüberplex BEM 41-141 Is a Lubricant for rolling and plain bearings subject to high loads.

Your benefits at a glance

– Trouble-free operation due to wide service temperature with good pumbability and metering via centralised lubrication systems

– Longer service life of rolling bearings due to good wear protection characteristics also under vibration conditions

– Higher reliability of wind power stations due to good grease distribution and oil separation

– Low frictional resistance and reduced component temperature

– Reduced wear due to excellent lubricity

– Easy changeover to Klüberplex BEM 41-141 as the lubricant is miscible with other greases

Your requirements – our solution

Klüberplex BEM 41-141 offers good pressure and wear resistance and does not contain any inorganic solid lubricants like MoS2 or graphite. Due to its good compatibility with commercial sealing materials, the grease can be used for a wide range of applications.

Application

Klüberplex BEM 41-141 has been especially designed for rolling bearings in wind turbines. The lubricant can be used for the initial lubrication and relubrication of rotor, generator and pitch bearings in wind power stations.

Klüberplex BEM 41-141 can also be used for constant velocity joints in lateral and longitudinal shafts of vehicles as well as for highly loaded rolling and plain bearings subject to vibrations and oscillations.

Application notes

Klüberplex BEM 41-141 can be applied by means of brush, spatula, grease gun, grease metering gun, automatic lowquantity or standard metering systems, grease cartridge, and centralised lubrication systems. We recommend conducting a metering test in the original dosing device under practical operating conditions.