溫馨提示您:
塑膠原料行情每天每時波動較大無法及時更新，個別貨物可能存在新舊包裝，請親們理解！產品信息和近期價格請您及時來電！
電話：鄧女士，葉經理
Lexan PC 945物性
非填充，注射級,無氯，非溴UL - 94 V0,有各種不透明的顏色,適用范圍廣 |
Property |
| TYPICAL PROPERTIES(1) | ||||
MECHANICAL | Value | Unit | Standard | |
Tensile Stress, yld, Type I, 50 mm/min | 630 | kgf/cm2 | ASTM D 638 | |
Tensile Stress, brk, Type I, 50 mm/min | 660 | kgf/cm2 | ASTM D 638 | |
Tensile Strain, yld, Type I, 50 mm/min | 6 | % | ASTM D 638 | |
Tensile Strain, brk, Type I, 50 mm/min | 125 | % | ASTM D 638 | |
Tensile Modulus, 50 mm/min | 23200 | kgf/cm2 | ASTM D 638 | |
Flexural Stress, yld, mm/min, 50 mm span | 1030 | kgf/cm2 | ASTM D 790 | |
Flexural Modulus, mm/min, 50 mm span | 23900 | kgf/cm2 | ASTM D 790 | |
IMPACT | Value | Unit | Standard | |
Izod Impact, notched, 23°C | 81 | cm-kgf/cm | ASTM D 256 | |
Instrumented Impact Total Energy, 23°C | 748 | cm-kgf | ASTM D 3763 | |
THERMAL | Value | Unit | Standard | |
Vicat Softening Temp, Rate B/50 | 143 | °C | ASTM D 1525 | |
HDT, MPa, mm, unannealed | 137 | °C | ASTM D 648 | |
HDT, MPa, mm, unannealed | 126 | °C | ASTM D 648 | |
CTE, -40°C to 40°C, flow | 1/°C | ASTM E 831 | ||
CTE, -40°C to 40°C, xflow | 1/°C | ASTM E 831 | ||
Relative Temp Index, Elec | 130 | °C | UL 746B | |
Relative Temp Index, Mech w/impact | 120 | °C | UL 746B | |
Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B | |
PHYSICAL | Value | Unit | Standard | |
Specific Gravity | - | ASTM D 792 | ||
Mold Shrinkage, flow, mm | - | % | SABIC Method | |
Melt Flow Rate, 300°C/ kgf | 10 | g/10 min | ASTM D 1238 | |
ELECTRICAL | Value | Unit | Standard | |
Arc Resistance, Tungsten {PLC} | 7 | PLC Code | ASTM D 495 | |
Hot Wire Ignition {PLC) | 2 | PLC Code | UL 746A | |
High Voltage Arc Track Rate {PLC} | 4 | PLC Code | UL 746A | |
High Ampere Arc Ign, surface {PLC} | 3 | PLC Code | UL 746A | |
Comparative Tracking Index (UL) {PLC} | 2 | PLC Code | UL 746A | |
FLAME CHARACTERISTICS | Value | Unit | Standard | |
UL Recognized, 94V-2 Flame Class Rating (3) | mm | UL 94 | ||
UL Recognized, 94V-0 Flame Class Rating (3) | mm | UL 94 | ||
UL Recognized, 94-5VA Rating (3) | mm | UL 94 | ||
Glow Wire Flammability Index 960°C, passes at | 1 | mm | IEC 60695-2-12 | |
Glow Wire Ignitability Temperature, mm | 875 | °C | IEC 60695-2-13 | |
Oxygen Index (LOI) | 35 | % | ISO 4589 | |
Processing |
| Parameter | ||
Injection Molding | Value | Unit |
Drying Temperature | 120 | °C |
Drying Time | 3 - 4 | hrs |
Drying Time (Cumulative) | 48 | hrs |
Maximum Moisture Content | % | |
Melt Temperature | 295 - 315 | °C |
Nozzle Temperature | 290 - 310 | °C |
Front - Zone 3 Temperature | 295 - 315 | °C |
Middle - Zone 2 Temperature | 280 - 305 | °C |
Rear - Zone 1 Temperature | 270 - 295 | °C |
Mold Temperature | 70 - 95 | °C |
Back Pressure | - | MPa |
Screw Speed | 40 - 70 | rpm |
Shot to Cylinder Size | 40 - 60 | % |
Vent Depth | 5 - | mm |
所有評論僅代表網友意見，與本站立場無關。