產品規格書/Specification高溫?zé)Y(jié)銀漿 陶瓷燒結銀漿 高溫導電銀漿
產品/product: | 大功率電阻漿料/ High-power Resist paste |
料號/Part number: | 05H06 series |
適用范圍/Application:
此產品適用于大功率電阻使用。
The resistor paste applies to High power Resistor.
使用條件/Operating conditions:
基材 Substrate | 氧化鋁陶瓷 96% alumina、surface roughness 3-5μm |
印刷 Printing | 200-250目絲網印刷 200-250 mesh stainless screen |
流平 Levelling | 室溫下流平5-15分鐘(時間根據流平的實際情況決定)。 5-15min minutes at room temperature |
干燥 Drying | 通風烘箱烘烤100-150℃,10-15分鐘 (空考溫度低于300℃,可根據烘烤的實際情況決定烘烤時間。) 100-150℃10-15 min |
燒結 Firing Condition | 隧道爐空氣氣氛下燒結,峰值850±2℃(推薦值),9-11分鐘。 Atmospheric firing in belt furnace with peak time of 9-11 Minutes at 850±2℃ |
Thinner | ST1000,ST1001 |
性能/Characteristics:
1.漿料性能/Paste Characteristics:
性能Characteristic | 標準Standard | 測試方法及條件 Test method and conditions | |
1 | Fineness | ≤8μm | FOG test |
2 | Viscosity | 100-200Pa.s | Brookfield HBT utility cup and spindle (SC4-14/6R), 10rpm,25±1℃, Brookfield HBT(博利飛)粘度計,轉子SC4-14/6R), 10rpm,25±1℃ 粘度可根據用戶實際需要調節。 |
2.燒結后特性/Characteristics after firing:
在1燒結條件下,膜厚8-12mm Check fired film produced under the conditions specified in 1), (Film thickness is 8-12mm.)
特性 Characteristics | Standard 標準 | 測試方法和條件 Test method and conditions | |
3 | 外觀 Appearance | 緊湊,致密 Compact and unknit | Eyeballing |
4 | 方阻值 Resistivity | ||
















所有評論僅代表網友意見,與本站立場無關。