技術參數：
Juno 精巧式USB接口
1）使探頭與電腦相連，無需外置電源；
2）可與所有Ophir公司的熱電堆，BeamTrack，熱釋電和光電二極管探頭聯用；
3）與BeamTrack探頭聯用，可進行光斑位置和光斑尺寸測量；
4）與熱釋電探頭聯用時，記錄數據速度達10kHz；
5）便于StarLab 應用，對功率，能量數據進行數據平均，統計處理，柱狀圖顯示；
6）以使用LabVIEW，COM Objec軟件接口。2.2 PC Interfaces 2.2.1 Compact Juno USB Interface Convert your laptop or desktop PC into an Ophir sensor power/energy meter ? From sensor to interface to PC - no power source needed ? Plug and play with all standard Ophir smart sensors ? Position & size measurement with BeamTrack sensors ? Record every energy pulse at up to 10kHz ? Log power and energy, average, statistics, histograms and more with included StarLab application ? LabVIEW VIs and COM Object interface ? Very compact - is just an extension of the smart plug Smart Sensor to Juno to PC Ophir’s basic smart compact Juno module turns your PC or laptop into a full fledged Ophir laser power/energy meter. Just install the software, plug the sensor into the Juno module and connect the Juno with a standard USB cable to the PC USB port. Using the Juno, you can connect several sensors to the PC by using one Juno module for each sensor and, if necessary, a USB hub. LabVIEW Juno operating with StarLab software Juno with BeamTrack sensor and StarLab showing beam power, position and size Specifications Power Measurement Power log period 5s to 500hr. Energy Measurement Max real time data logging to PC 10,000Hz (a) Trigger input and output N.A. Timing Supports time stamp for each pulse - resolution 10µs General Number of sensors supported One sensor per unit. Can combine several units with software for display of up to 8 sensors on one PC Compatible sensors Supports all standard Ophir pyroelectric, thermal and photodiode sensors (b) Power supply Powered from USB Dimensions 76 x 55 x 22mm Notes: (a) This is the data logging rate for every single point in turbo mode. Above that rate, the instrument will sample points but not log every single point (b) Not including RP sensors, PD300-CIE, BC20 and PD300-BB Ordering Information Item Description Ophir P/N Juno Compact module to operate one Ophir sensor from your PC USB port. Comes with software. Max repetition rate for every pulse 10kHz. Powered from PC USB port 7Z01250 Juno USB cable Cable USB2.0 A MINI-B (1 unit supplied with Juno) 7E012171）標準光電二極管探頭

2）圓形光電二極管探頭

3) 光電二級管探頭和積分球

BC20 PD300-BB/PD300-BB-50mW PD300-CE

3A-IS 3A-IS-IRG