本公司5月20號08點55分報道： TCJT-25型塑料薄膜和薄片測厚儀-水利水電粗粒土
（/c149978/products/d.html）
產品簡介
YI、TCJT-25型塑料薄膜和薄片測厚儀簡介：
YI、TCJT-25型塑料薄膜和薄片測厚儀簡介：
TCJT-25型塑料薄膜和薄片測厚儀適用于塑料薄膜、薄片的厚度測試，還可適用于紙張、紙板的厚度測試、箔片、硅片、金屬片的厚度測試、紡織材料的厚度測試、固體電絕緣體的厚度測試。
Brief introduction of tcjt-25 thickness gauge for plastic film and sheet:
Tcjt-25 thickness gauge for plastic film and sheet is suitable for thickness test of plastic film and sheet, paper and paperboard, foil, silicon and metal, textile materials and solid electrical insulator.
技術參數
二、TCJT-25型塑料薄膜和薄片測厚儀產品參數：
二、TCJT-25型塑料薄膜和薄片測厚儀產品參數：
1、分度值0.001mm 量程0-12mm
2、上下測量面為凸/平面時，上測量面的曲率半徑在15-50（mm）時，其測量面對試樣施加的負荷為0.1N到0.5N之間。
3、測量精度
（1）100um以內 精度1um
（2）100um到250um 精度2um
（3）250um以上 精度3um
4、外形尺寸：160x140x200mm
5、重量：1.5kg
Product parameters of tcjt-25 thickness gauge for plastic film and sheet:
1. Division value 0.001mm, range 0-12mm
2. When the upper and lower measuring surfaces are convex / plane and the curvature radius of the upper measuring surface is 15-50 (mm), the load applied on the measuring surface is between 0.1N and 0.5N.
3. Measurement accuracy
(1) Within 100um, the precision is 1um
(2) 100um to 250um accuracy 2um
(3) The precision is above 250um and 3um
4. Overall dimension: 160x140x200mm
5. Weight: 1.5kg
產品資料
三、TCJT-25型塑料薄膜和薄片測厚儀使用方法：
三、TCJT-25型塑料薄膜和薄片測厚儀使用方法：
1、測試先把千分表清零，并撥動操縱桿試幾次回零后，再進行測試。操作時輕抬輕放以免損壞測足及儀表。
2、用手指按下操縱桿使測足上抬，將被測物置于工作臺、測足之間。輕放操縱桿，此時表的讀數即被測物的厚度，
3、使用完畢后將儀器裝入盒內并置于干燥處防止受潮。
Use method of tcjt-25 thickness gauge for plastic film and sheet:
1. Before the test, clear the dial indicator and move the control lever to zero several times before the test. During operation, lift and place gently to avoid damaging the foot and instrument.
2. Press the control lever with your fingers to lift the foot, and place the object between the workbench and the foot. Place the control lever gently, and the reading of the meter is the thickness of the object to be measured,
3. After use, put the instrument into a box and put it in a dry place to prevent moisture.
主營產品：土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument
更新時間：2022/5/30 15:03:16
所有評論僅代表網友意見，與本站立場無關。