SY-600 Tension Meter 張力計
2 Tension ranges from 200 - 1500 daN up to 400 - 3000 daN |
Wire rope tension meter to determine the tension of overhead lines, tensioning ropes, contact wires, aerials, etc. up to max. 24 mm Ø. |
This instrument is used for control and comparision measurement of pretensioned non running ropes. |
| |||||||||
| ||||||||||
| ||||||||||
|
| ||||||||||||||
|
| ||||||||||||||
| |||||||||||||||
With the two outer rollers, the device will be hooked into the strained rope. With a knurled screw, the middle roller will be brought in the measuring position. Operation is based on precisely measuring deflection, caused by the application of a force mid-way between two U-grooved pulley supports. Cable tensions are then determined by nothing the reading on a precision dial indicator that measures the deflection. The measuring result has to be converted from mm reading to the corresponding force in daN with the help of a conversion chart. The smalest rope length to be measured between two fixing points is 5 m. | |||||||||||||||
| |||||||||||||||
| |||||||||||||||
| |||||||||||
| |||||||||||
Standard | SY-600 | Aluminium (radius R7) |
Standard | SY-1000 | Aluminium (radius R12) |
Conversion Chart
for read off the tension.
For special ropes we need a material sample of about 5 m to generate a conversion chart.
Delivery Includes
Tension Meter with aluminium suitecase, operating instructions in german or english as requested
| ||||||
Scale diameter: | 100 mm |
Rollers: | Aluminium, Ø 65 mm |
Housing material: | Aluminium |
Dimensions: | SY-600: 680 x 58 x 237 mm (LxBxH) |
Weight, net (gross): | SY-600: approx. 2.8 kg (approx. 11.4 kg) |
計量 相關儀器：硬度計，粗糙度儀，電子天平，超聲波測厚儀，電火花檢測儀，溫度計，推拉力計，磁粉探傷儀，紅外線測溫儀，超聲波探傷儀，瓶蓋扭力計，紫外線燈，可見光分光光度計
所有評論僅代表網友意見，與本站立場無關。