Product features:YTX-150BType of explosion-proof electric contact pressure gaugeThis instrument is according to the national standard:GB/T1226-2001General pressure gauge of the national standard;GB3836. 1-2000《Explosive gas environment with electrical equipment part 1: general requirements》;GB3836. 2-2000The explosive gas environment, the first electrical equipment9Parts: flameproof"d"" and the relevant regulationsJB/T9773-1999The electric contact pressure gauge industry standard design and manufacture.This instrument category for the flameproof explosion-proof, explosion-proof marksdⅡBT6 。A, roadThis instrument in the environment for the dangerous sites with explosive mixture, which is used to measure the copper and copper alloys, such as ordinary carbon steel non-corrosive of crystals, the solidification of medium pressure (pressure).Through contact device with the corresponding explosion-proof performance of electrical parts.The medium to be measured pressure, automatic control, alarm, signal remote transmission and other functions.Note: measuring the corrosive medium, crystallization and solidification, the need to use acid, corrosion or explosion proof electric contact diaphragm pressure gauges, measuring small pressure (10Kpa ~ 60Kpa), it is necessary to adopt the bellows explosion-proof electric contact pressure gauge. |
所有評論僅代表網友意見，與本站立場無關。