Product description:

Summary

UFDZ top loading (bottom mounted) magnetic level gauge is the user needs to hole position in the underground container and the development of a new generation of liquid level meter, with UIZ built-in level compared with low price, suitable for flammable and explosive, toxic, corrosive and volatile environment. Is a special type of UFZ, side mounted magnetic level gauge is reliable and safe and convenient observation, clear liquid level indicator and other characteristics, widely used in oil tanks, underground storage tanks, tank containers and food, chemicals, fertilizer and other industries, while the liquid level meter with related accessories, also has the alarm and the control signal output function.

Main technical index

1, measuring range (mm): 300 ~ 6000

2, medium density (g/cm3): 0.5 ~ 2

3, working temperature (c): -40 ~ 350

4, pressure level (MPa): ≤ 32

5, measurement accuracy (mm): ≤ ± 10

Working principle

The product is composed of a body (composed of upper and lower duct), reverse box (You Hong, white small magnetic plate), float (float by magnet, a push rod, etc., its structure composition) as shown in the figure, the principle of work is: the container buoy (according to different media pressure and needle to develop, in conduit) with the liquid level height change of the floating through the push rod to make the magnet in the conduit to move up and down, turning plate to the outside and with a red, white color to indicate the height of liquid level.

Characteristic

1, when the container is not suitable for the opening of the side of the container and the surrounding space is very small, can be installed in the upper or lower part of the container level meter

2, applicable to the viscosity of the liquid medium

3, observe the direction of the display can be arbitrarily changed

4, other features and UFZ features the same

Instructions for use

1, anti-corrosion nominal pressure ≤ 1.0MPa.

2, the liquid level meter has a certain blind area, so when reading the height of the liquid level should be added to the value of the blind area compensation (factory level gauge factory, the ruler scale zero has been moved to the actual value).

3, liquid level meter measuring range of not more than 5 meters, otherwise affect the level of stability, reliability, fastness, etc..

4, the installation of the connection flange, the liquid level gauge factory commonly used in reference to the size of the surface (HG21592-97) manufacturing.

Installation and maintenance

1, the liquid level meter and the main body of the catheter must be vertical

2, the connecting rod can not bend, must be inserted straight

3, after installation, need to use a magnetic turning column guide to zero above display white display, display the red below zero.