Product description:

The single bolt clamping terminal

The busbar is designed with an advanced single bolt clamping terminal, which is connected to the busbar slot unit

Make, can prevent erroneous operation during installation, and as long as a bolt tightening, can reliably and quickly will be two

The busbar trunking units are connected.

High level of protection jack

Busbar design safety baffle in the jack, only when the guard opened, the plug-in box to insert, insert

The hole usually do not can be closed and pull protective plate lead to prevent the blocked dead, Jack into the dust and foreign bodies, from

And improve the performance of the busbar protection, prevent misoperation, so that the safety of the bus has been greatly improved.

The shell (shell protection grade number)

Busbar design 5 current ratings, using only the 3 classes of shell, so when the system according to the adjacent grade transformation capacity

When the bus slot does not need to replace the shell, such as 400A change 630A, the same size of the shell, so greatly facilitate the installation.

The transmission of large electric energy

The bus bar is designed to separate the air insulation, improve the dispersion of the bus bar and reduce the impedance

Better economic transmission.

- complete and good

Busbar trunking system is designed to meet the needs of all transmission projects.