Brief description
In combination with Rohde & Schwarz spectrum analyzers, the R&S®TS-EMF measurement system detects high-frequency electromagnetic fields in the environment (EMF). The isotropic antenna, together with the software, which has been specifically designed for EMF measurements, allows simple and precise evaluation of total and individual emissions on site.
Measuring EMF emissions in line with national and international standards provides a basis for ensuring that transmitter systems comply with the applicable limits and for communicating this to the general public. The key criterion is a precise, easy-to-make on-site measurement.
Key facts
- Automated EMF measurements
- Precise measurements of even complex scenarios and RF signals
- Wide frequency range from 9 kHz to 6 GHz, covered by isotropic antennas
- Isotropic antenna detecting fields independent of direction and polarization
- Combined use possible with various Rohde & Schwarz spectrum analyzers, test receivers and network scanners
features & benefits
- The R&S®TS-EMF measurement system supports users by providing automated test sequences, including preconfigured measurement packets. The isotropic antenna detects fields independent of their direction and polarization. A wide range of Rohde & Schwarz spectrum analyzers and test receivers is available for performing such measurements. In particular, the compact one-box solution with the R&S®FSL spectrum analyzer allows measurements to be performed even in locations that are difficult to access.
- Safety based on exact measurements for reproducible and reliable results
- Evaluation of total emissions, individual radio services or individual frequencies
- Measurements in line with all common EMF standards and measurement methods
- Correct evaluation of complex scenarios or RF signals
- Excellent reproducibility using automated measurements
- Efficient on-site measurements
- Fast, efficient measurements thanks to predefined test routines
- On-site interpretation of results using integrated report generation
- Easy adaptation to local conditions
- Versatile use due to the compact one-box solution with the R&S®FPL spectrum analyzer
- Standalone measurements of R&S®FPH and R&S®FSH spectrum analyzers with isotropic antennas
- Suitable for a wide range of applications
- Investigation of specific problems or radio signals by directly setting individual measurement parameters
- Additional manual measurements using a full-fledged spectrum analyzer
- Optional storage of raw measurement data for further in-depth result evaluation
- Precise extrapolation for WCDMA and LTE signals using demodulation
- Future-ready
- Coverage of the complete frequency range from 9 kHz to 6 GHz using isotropic antennas
- Measurements of advanced radio services with wide bandwidths and high crest factors
-
Specifications
| Isotropic antennas | R&S®TSEMF-B3 | R&S®TSEMF-B1 | R&S®TSEMF-B2 |
| Measurement principle | isotropic reception due to orthogonally arranged antenna elements that are electronically switched | ||
| Frequency range | 9 kHz to 200 MHz | 30 MHz to 3 GHz | 700 MHz to 6 GHz |
| Minimum detectable field strength | approx. 1 mV/m | ||
| Maximum field strength | ≥100 V/m | ≥230 V/m | ≥230 V/m |
| Isotropy | ≤ ±1.37 dB | ≤ ±2.1 dB, | ≤ ±2.5 dB (0.6 GHz to 2 GHz), |
| Mechanical design | radome protection against mechanical damage and environmental hazards | ||
| Antenna factor | individual calibration data, saved on USB dongle and/or CD | ||
| Axis switching | RF solid state switch | ||
| Connecting cables | direct connection to spectrum analyzer (extension cable (length: 8 m) see accessories) | integrated cable (length: 2 m) ferritebeaded (extension cable (length: 8 m) see accessories) | integrated cable (length: 2 m, extension cable (length: 8 m) see accessories)) |
| RF connector | N male | ||
| Connector, control line | 7-pin connector (binder) for direct connection to R&S®FSH power sensor port, adapter cable for connection to notebook or spectrum analyzer with USB output | ||
| Tripod adapter | ?-" thread, quick connector for antenna | ||
| Requirements for notebook (not supplied) | MS Windows7 or Windows8 operating system, free hard disk space: min. 5 Gbyte | ||
| Equipment supplied | isotropic sensor with connecting cable operator’s guide for R&S®RFEX and R&S®RFEX-Fast measurement software (on CD), tripod adapter, USB adapter cable, transit case (R&S®TS-EMF with at least one isotropic antenna) | ||
| Expanded measurement uncertainty R&S®TS-EMF with R&S®FSH (95 % confidence level (k = 2)) | ≤ ±2.5 dB | ≤ ±3.3 dB, | ≤ ±3.1 dB (0.7 GHz to 1 GHz), |
| Expanded measurement uncertainty R&S®TS-EMF with R&S®FSL (95 % confidence level (k = 2)) | ≤ ±2.4 dB | ≤ ±3.2 dB, | ≤ ±2.9 dB (0.7 GHz to 1 GHz), |
| Power supply | via spectrum analyzer or laptop | ||
| Ambient conditions | –10 °C to +50 °C, safety class IP54 (see user manual for details) | ||
| Weight (incl. cable) | 0.85 kg | 1.3 kg | 0.95 kg |
| Dimensions (L × ∅) | 550 mm × 146 mm | 475 mm × 170 mm | 415 mm × 87 mm |
所有評論僅代表網(wǎng)友意見，與本站立場無關(guān)。