德國NORELEM公司經營多種標準精密配件產品種類達多1000多種；涵蓋范圍包括：自動調節或控制儀器及裝置,液體或氣體流量、液位、壓力等的檢測儀器,其他用于激光操作的機床、金屬加工機組、車床和鉆床等的零件和附件,鋼鐵螺釘、螺栓、螺母、方頭螺釘等緊固件及類似品,金屬器具、利口器、餐具及零件,未列名檢測儀器、器具及機器、輪廓投影儀,鐵鑄件。

德國Norelem公司成立于1958年。Norelem公司的產品重視質量認證，并獲得DIN EN ISO 9001 ：2000 。NORELEM主要分四大類產品分別是：靈活的標準組件系統，測量和測試元件，系統和元件的機械和設備和TechnoShop norelem。

NORELEM靈活的標準組件系統的產品包括：底板，圓板，角板，線夾，夾具，操作部件。四面角板，切換定位，氣動夾具等。

NORELEM系統和元件的機械和設備產品有：定位表，直線導軌系統，聯軸器，交岔路品接頭，插頭，排氣螺釘，管連接，線夾等。

NORELEM測量和測試元件：平面表，測量三腳架，接頭，通用測量夾具，撥號計，標準組件的檢查和測試設備等。

NORELEMTechnoShop norelem產品有：輸送機，螺絲刀，鉗子，錘，潤滑油，工具箱， Gauge Strip 計地帶， Magnetic Labels 磁性標簽， Magnetic Envelopes 磁信封等。

06262 Handwheels
Description
Material:Black grey thermoplastic.
Version:Steel parts black oxidised.
Note:The hub cap is supplied loose.The handwheels can be secured using a transverse pin or by parallel key connection together with a DIN 6912 socket head screw and a DIN 7349 washer.Versions with transverse bore are fastened using the ISO 4026 (DIN 913) grub screws.

06263 Handwheels with revolving grip
Description
Material:Black grey thermoplastic.
Version:Steel parts black oxidised.
Note:The hub cover and the revolving cylinder grip are supplied unassembled. In order to assemble the grip, the axis must be screwed into the receiving hole.The handwheels can be secured axially to the shaft via feather connection by cross-pinning or with a socket head screw to DIN 6912 and a washer to DIN 7349.Versions with transverse bore are fastened using the screwed grub screw ISO 4026 (DIN 913).For assembly example, see 06262.

06264Handwheels with fold-away grip
Description
Material:Black grey thermoplastic.
Version:Steel parts black oxidised.
Note:The hub cover is supplied loose.The handwheels can be secured using a transverse pin or by parallel key connection together with a DIN 6912 socket head screw and a DIN 7349 washer.Versions with transverse bore are secured using the ISO 4026 (DIN 913) grub screw.For assembly example, see 06262.

06265Handwheels with safety grip
Description
Material:Black grey thermoplastic.
Version:Steel parts black oxidised.
Note:The hub cover is supplied unassembled. The handwheels can be secured axially to the shaft via feather connection with a socket head screw to DIN 6912 and a washer to DIN 7349.Two steps are required to move the cylindrical safety grip into operating position:
- Turn handle by rotary shaft up to stop (90°).
- Push grip in axial position into locking position.
The pressed-in position is the most comfortable position to crank. When released, the grip automatically returns to original position.Versions with transverse bore are fastened using the screwed grub screw ISO 4026 (DIN 913).For assembly example, see 06262.