XF-3535自動石油產品傾點試驗儀XF-3535型自動石油產品傾點試驗儀系本公司*新開發出來的高科技產品。儀器具有操作簡單、重復性好等特點。由于使用了內藏式壓縮機制冷器，使整個儀器結構合理緊湊。另外計算機系統具有多彩的顯示界面，使整個試驗過程達到了全自動化，大型液晶顯示屏能清晰地顯示出試驗狀態和測試數據。試驗儀適用于GB/T 3535《石油產品傾點測定法》標準，ASTM D97《ASTM D97 - 09 Standard Test Method for Pour Point of Petroleum Products石油的傾點的試驗方法》標準。

詳情介紹

XF-3535自動石油產品傾點試驗儀

XF-3535型自動石油產品傾點試驗儀系本公司*新開發出來的高科技產品。儀器具有操作簡單、重復性好等特點。由于使用了內藏式壓縮機制冷器，使整個儀器結構合理緊湊。另外計算機系統具有多彩的顯示界面，使整個試驗過程達到了全自動化，大型液晶顯示屏能清晰地顯示出試驗狀態和測試數據。試驗儀適用于GB/T 3535《石油產品傾點測定法》標準，ASTM D97《ASTM D97 - 09 Standard Test Method for Pour Point of Petroleum Products石油的傾點的試驗方法》標準。

特點
(1)所有的設定及試驗操作均可在控制面板上進行;
(2)觸摸式液晶顯示屏及中文界面使設定、操作更為方便;
(3)試驗過程中的控溫狀態、降溫曲線及檢測次數等可通過顯示屏實時顯示;
(4)高穩定制冷系統保證了試驗所需制冷效果；
(5)只需連接打印機即可得到詳細的測試數據;
(6)采用高靈敏度光纖檢測裝置,能正確地測出實時傾點;
(7)具有自動故障檢測及報警功能;
(8)本試驗儀配有將數據輸入微機的標準輸出口(RS-232C),有利于實驗室網絡化品質管理。
儀器規格：
(1)適用范圍: GB/T 3535，ASTM D97標準。
(2)儀器形式：臺式、全不銹鋼結構
(3)制冷裝置：復疊式制冷器
(4)試驗溫度范圍: -50℃ - 80℃（零下50℃ 到 80℃）
(5)溫度表示單位: 0.1℃
(6)溫度檢測：特制鉑電阻傳感器
(7)傾點檢測：光纖傳感器
(8)程序控制方式：微機控制
(9)冷阱冷卻：壓縮機制冷方式。
(10)加熱:鎳鉻絲加熱管AC-220V，200W
(11)打印:面板式針式打印機。
(12)試驗結束報知:試驗結束后蜂鳴器鳴叫(10秒)，然后打印機將試驗條件、試驗數據打印出來。
(13)異常情況表示:報警器鳴叫,顯示屏上顯示故障內容。
(14)電源:AC-220V，50/60Hz，1500W
(15)尺寸/重量:
·制冷裝置：400(W)×400(D)×750(H) mm；約30kg
·測定部分：300(W)×D300(D)×250(H) mm；約10kg
標準配置：
1、主機　　　　　　　　1臺
2、外置復疊式制冷器　　1臺
3、試樣管　　　　　　　10支
4、保險絲（10A）
5、使用說明書　　　　　1冊

根據需要，公司可未經預告對儀器的規格和外形進行更改，望予以諒解為盼。

XF-3535自動石油產品傾點試驗儀

XF-3535

XF3535

MTMDP-4L多量程扭矩試驗儀臺江三穗劍河天柱

產品描述：

The MTM Series of torque transducer are designed to provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) include an integrated display for a fully integrated tester.

Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing.

The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.

Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.

* MTMDP-2 coupled with an MTM-4.

Features

Available with 2, 3 or 4 torque transducers

Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m

Small footprint of the MTM allows for a clean, well-organized work space

200% Overload protection

LED Indicator Shows Active Transducer

External transducers can be connected with cable input

Includes NIST Traceable calibration certificate with data for each transducer

Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.

技術參數：

Calibrated Range	10-99% Full Scale, bi-directional (Standard)
Extended Range	5-99% Full Scale, bi-directional (ER Option)
Accuracy	±0.5% of indicated (within calibrated range)
Resolution	4 Active Digits
Overload Protection	200% Full Scale bi-directional
Operating Modes	Track, Peak, 1st Peak
Filtering	Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz
Memory	data storage of up to 999 readings
Data Output	RS-232
Display	62 x 62mm backlit LCD
Alarm Limits	Panel Mounted LED for Visual Alarm Limits
Power	NiMH rechargeable batteries provide 8-10 hours continuous use
Weight	6-12 lbs, depends on number of transducers and configuration
Operating Temp	32 - 120 °F (0-50 °C)
Warranty	1 Year
Calibration Certificate	Includes NIST Traceable calibration certificate with data for each transducer
Standard Accesories	Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger
Optional Accessories	Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option

MIKROTEST麥考特機械涂層測厚儀 MIKROTEST 超聲波測厚儀 MiniTest420/430/440 超聲波測厚儀MiniTest420/430/440 MiniTest-420/430/440 MiniTest600 涂鍍層測厚儀 MiniTest600涂鍍層測厚儀 MiniTest-600 高精度涂層測