XF-0090型發動機冷卻液自動冰點試驗儀XF-0090型發動機冷卻液自動冰點試驗儀系本公司*新開發出來的高科技產品。適用于測試標準SH/T 0090 發動機冷卻液冰點測定法，和ASTM D1177 含水發動機冷卻劑凝固點的試驗方法 Standard Test Method for Freezing Point of Aqueous Engine Coolants。　　XF-0090發動機冷卻液自動冰點試驗儀操作簡單，自動控制、測試樣品、計算結果，試驗結束自動停機。試驗過程全自動化，大型液晶顯示屏具有多彩的顯示界面，能清晰地顯示出試驗過程，時間與溫度曲線，試驗狀態和測試數據可打印輸出。XF-0090發動機冷卻液自動冰點試驗儀自動測試重復性好。儀器使用了內藏式壓縮機制冷器，儀器結構合理緊湊，整體體積小，可以放置在實驗臺上。

詳情介紹

XF-0090型發動機冷卻液自動冰點試驗儀

XF-0090型發動機冷卻液自動冰點試驗儀系本公司*新開發出來的高科技產品。適用于測試標準SH/T 0090 發動機冷卻液冰點測定法，和ASTM D1177 含水發動機冷卻劑凝固點的試驗方法 Standard Test Method for Freezing Point of Aqueous Engine Coolants。
XF-0090發動機冷卻液自動冰點試驗儀操作簡單，自動控制、測試樣品、計算結果，試驗結束自動停機。試驗過程全自動化，大型液晶顯示屏具有多彩的顯示界面，能清晰地顯示出試驗過程，時間與溫度曲線，試驗狀態和測試數據可打印輸出。XF-0090發動機冷卻液自動冰點試驗儀自動測試重復性好。儀器使用了內藏式壓縮機制冷器，儀器結構合理緊湊，整體體積小，可以放置在實驗臺上。

特點
(1)所有的設定及試驗操作均可在控制面板上進行；
(2)大型液晶顯示屏及中文界面使設定、操作更為方便；
(3)試驗過程中的控溫狀態、降溫曲線及檢測次數等可通過顯示屏實時顯示；
(4)高穩定制冷系統保證了試驗所需制冷效果；
(5)只需連接打印機即可得到詳細的測試數據；
(6)采用高靈敏度溫度檢測裝置,能正確地測出實時冰點；
(7)具有自動故障檢測及報警功能；
(8)XF-0090發動機冷卻液自動冰點試驗儀配有將數據輸出的標準輸出接口(RS-232C),有利于實驗室網絡化品質管理。
(9)XF-0090發動機冷卻液自動冰點試驗儀可以遠程操作，檢查控制功能，處理異地維修省時省力獨樹一幟。

儀器規格：
(1)適用范圍：SH/T 0090 ASTM D1177
(2)儀器形式：臺式
(3)程序控制方式：微機控制
(4)試驗溫度范圍：40℃- -80℃(40℃- 零下80℃)
(5)溫度表示單位：0.1℃
(6)冰點檢測：特制鉑電阻傳感器
(7)制冷裝置：復疊式制冷器
(8)冷阱溫度檢測：Pt100溫度檢測傳感器
(9)冷阱冷卻方式：壓縮機制冷方式
(10)打?。鹤詭Т蛴C，打印試驗結果
(11)試驗結束報知：試驗結束后蜂鳴器鳴叫(10秒)，然后打印機將試驗條件、試驗數據打印出來
(12)異常情況表示：報警器鳴叫,顯示屏上顯示故障內容
(13)電源：AC 220V,50/60Hz, 1500W
(14)尺寸/重量：550W×450D×600H(mm)；約40kg

標準配置：
1、儀器主機1臺
2、冰點檢測組件1套
3、試樣管2支
4、打印紙卷2個
5、保險絲（10A）2個
6、使用說明書1冊

SH/T 0090 發動機冷卻液冰點測定法
ASTM D1177 含水發動機冷卻劑凝固點的試驗方法 Standard Test Method for Freezing Point of Aqueous Engine Coolants

根據需要，公司可未經預告對儀器的規格和外形進行更改，望予以諒解為盼。

XF-0090型發動機冷卻液自動冰點試驗儀

XF-0090

XF0090

MTMDP-4S多量程扭矩試驗儀上思崇左寧明龍州

產品描述：

The MTM Series of torque transducer are designed to provide an economical way to measure and calibrate multiple torque tools. The MTMDP models (MTMDP-2S pictured) include an integrated display for a fully integrated tester.

Historically, transducers had to be purchased individually and connected to a display via a switch box or a group of cables. With the MTM series, up to 4 transducers can integrated in one compact housing.

The small footprint also allows for a clean, well-organized work space. This helps eliminate the endless searching for cables, adapters, and other accessories that may be needed.

Features such as independent CW and CCW calibration, multi-point linearization, metrology grade transducer shafts, and overload protection to 200% of full scale are standard. All of the above translate to a better product for you at an unbeatable price.

* MTMDP-2 coupled with an MTM-4.

Features

Available with 2, 3 or 4 torque transducers

Selectable units of: Ft-lb, IN-lb, IN-oz, KGF-m, KGF-cm, GF-cm, CN-m, N-m

Small footprint of the MTM allows for a clean, well-organized work space

200% Overload protection

LED Indicator Shows Active Transducer

External transducers can be connected with cable input

Includes NIST Traceable calibration certificate with data for each transducer

Replaceable shaft design. If one shaft is damaged, replace that shaft, not the entire unit.

技術參數：

Calibrated Range	10-99% Full Scale, bi-directional (Standard)
Extended Range	5-99% Full Scale, bi-directional (ER Option)
Accuracy	±0.5% of indicated (within calibrated range)
Resolution	4 Active Digits
Overload Protection	200% Full Scale bi-directional
Operating Modes	Track, Peak, 1st Peak
Filtering	Selectable; 125Hz, 250Hz, 500Hz, 1000Hz, 1500Hz and 2000Hz
Memory	data storage of up to 999 readings
Data Output	RS-232
Display	62 x 62mm backlit LCD
Alarm Limits	Panel Mounted LED for Visual Alarm Limits
Power	NiMH rechargeable batteries provide 8-10 hours continuous use
Weight	6-12 lbs, depends on number of transducers and configuration
Operating Temp	32 - 120 °F (0-50 °C)
Warranty	1 Year
Calibration Certificate	Includes NIST Traceable calibration certificate with data for each transducer
Standard Accesories	Joint Simulator for 1/4" & 3/8" drives, AC adapter/Charger
Optional Accessories	Joint Simulators for 1/2", 3/4" & 1" Transducers, Extended Ranger "ER" Option