產品說明 Molub-Alloy Paste TA（原名 Optimol Paste TA）用于溫度為 +1100°C/+2012°F 的螺紋接口，可用作裝配膏， 防止卡死、焊接或結垢。 Molub-Alloy Paste TA 可確保在高溫潮濕的環境以及受到腐蝕介質影響的環境下實現優良的分離和封閉作用。 應用場合 適用于腐蝕和極限溫度環境下的組件裝配，例如： 螺絲、襯套和閥門 法蘭接頭和螺紋管接口 強制聯鎖組件。 密封裝置、填料函和包裝。 輕金屬/鋼摩擦表面。 在高熱負荷環境下用作滑動表面的基礎或薄膜潤滑。 使用條件 清潔表面。使用刷子或無絨布均勻涂抹薄薄一層 Molub-Alloy Paste TA。 要實現良好的密封效果，請將足量的 Molub-Alloy Paste TA 涂覆到螺紋根部。 應在裝配之前使用鋼絲刷將粗糙的污染物從螺紋中去除。 Molub-Alloy Paste TA 僅適合油膏專用的應用 - 無法代替潤滑油或潤滑脂潤滑。 請勿與其它油膏、潤滑脂或潤滑油混合。 產品優點 高承載能力。 抗冷、熱水。 使用經濟性。 抗酸抗堿。 良好的腐蝕保護能力。 出色的分離能力。 易于涂覆

Description
MOLUB-ALLOY 3036/680-1NG has been designed for high loads under unfavorable ambient conditions. Due to its
formulation and additives it is able to cope with the extremely high loads and shock loads present in the steel and
construction industry as well as in mining and forestry.
For the production of MOLUB-ALLOY 3036/680-1 NG lubricating grease a mixture of mineral oil and polymers is
used which form a thick lubricating film suited to withstａnd shock loads and vibrations.
The shear-stable thickener has an excellent sealing effect against impurities in case mechanical seals have failed
or are missing all together (sealing grease collar at the bearing).
Inhibitors against corrosion and oxidation improve the rust protection and aging resistance of the base oil.
Application
Rolling bearings, all types of sliding bearings, spindles, joint couplings (except for high-speed precision
couplings), running gears, cams as well as general grease lubricating points especially where loads are high and
speeds low.
The grease is applied to the lubricating points by a hａnd lubricator or via an automatic lubricating system which is
suited for NLGI 1 greases.
Conditions of Use
MOLUB-ALLOY 3036/680-1NG should not be mixed with lubricating greases withdifferent soap base.
After changing over to MOLUB-ALLOY 3036/680-1NG the lubricating intervals should be gradually extended to
ensure a thorough removal of the previous grease.
Advantages
Very good sealing effect due to its optimum adhesion.
Selected EP additives ensure an excellent protection against wear and scuffing even in boundary and mixed friction
areas; this feature is especially important during stop-and-go operation, low speeds and/or high loads and shock
loads.
These benefits result in economic savings: less repair work and fewer downtime periods, prolonged service life of
machine components and extended relubrication intervals.

如有不詳之處，敬請