固定45度斜邊工藝，實現高品質斜面封邊效果。
Fixed 45° fixed beveled edging，realization high quality beveled edge banding effect.
高速鋸切并粉碎切削板件邊緣，預先將板件斜直面銑削平整，使斜直面封邊效果更出色。
High-speed cutting and crushing panel edge, pre-mill panel to be smooth bevel ,acquire better bevel edge banding effect.
斜直邊均勻涂膠，無縫粘合斜面封邊，配置計數器調節直觀便捷。
Glue the bevel & straight edge evenly , seamless bevel edge banding , equipped with counter for convenient and intuitive adjustment.
配合計數器直觀快速調節壓梁高度，節省調機時間，提高效率。
Adjust height of pressure beam quickly with counter,save time and improve efficiency.
通過精密的直線導軌運動，快速切斷板材前后多余邊帶。確保切斷面平整光滑。
Quickly cut off excess edge bａnd on the front and back of the board by precise linear guide motion to ensure a flat and smooth cut surface.
修去板件表面上下多余的封邊帶，消除波紋痕跡。
配備上下邊刮刀，使斜邊封邊上下邊緣弧度更加圓潤美觀。
Equipped with top and bottom scraping to make panel edge smoother ａnd better-looking.
廣泛應用
廣泛應用于免拉手抽屜面板，門板，辦公室面板等，可實現斜邊封邊的效果。Widely applicable to free-pulled drawer handles, door sheets, office panels, etc, to achieve bevel edging results.
