快換式上熔膠，預留PUR端口，膠鍋液位高精儀器監測，自動預熔，自動抽膠粒。
The pre-melt system with PUR terminal reserved equips with glue level sensor, EVA glue pre-melts and automatically applies.
膠箱儲量大，可滿足長時間供膠，減少人工加膠頻率。
With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application.
采用四組高頻馬達電機，實現穩定、更快速的封邊帶仿形圓角修邊。
Equips with 4 trimming motors, fast and stable in corner chamfering.
用于消除修邊切削時產生的波紋痕跡，使板材更加美觀。配備定向吹絲功能。
Trim off the cutter marks left on panel surface.Equips with blowers.
高硬度、高耐磨性。
High-hardness, high wear-resistance.
快速切換加工不同厚度的板件，減少調機時間，提高效率。
Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency.
記錄設備運行信息。
Real-time recording of machine operation information.
壓緊接觸面積大，確保木板高速輸送的穩定性，提升封邊品質。
A large contact area on the panel ensures a stable conveys with high speed, improving edging quality.
標配40mm銑刀(選配65mm)。
Standard with 40mm milling cutter (optional 65mm).
雙銑刀修飾開料后產生的波紋痕跡、毛刺或不垂直等瑕疵，使封邊條和板材貼合更緊密，提高封邊效果。
Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results.
預熱板件，提升板材與邊帶的粘合效果。
Panel preheats, improving a better adhesiveness between panel and tapes.
強力壓合邊帶，提高封邊粘合效果。
Strongly press edge tape to improve edge banding effect.
快速切斷板件前后多余邊帶，前后單獨導軌配置，高效，快捷。
Fast cut off the recessives tapes in front&rear.
配備自動潤滑系統，根據運行次數自動注油，確保齊頭機構運行順暢，提升使用壽命。
Automatic lubrication according to running status, ensures a smooth working and pro-long service life.
清除板件上下面的余膠和碎屑。
Clean the tape chips or glue off panel service.
可在待封邊的板件上下面噴一層脫模劑，有效防止封邊過程中溢出的熱熔膠粘染板面。
Prevents the adhesion of hot melt glue residues on the top and bottom of workpieces, so creating optimum workpiece quality.
板材上下表面噴涂清潔劑，配合拋光機構清潔板材上下面的余膠和碎屑。
Application of the cleaning agent on top&bottom of workpiece to perfectly work with buffing units for clean and best edging results.
