可封短邊40mm的板材

Realize edge banding with panel width 40mm

快速切換加工不同厚度的板件，減少調機時間，提高效率

Precise & quick adjustment according to workpiece thickness, reducing adjustment time and improving efficiency

有效防止板材端頭封邊偏位，送料方便、安全穩定，確保封邊質量

Stable feeding with small pieces, effectively prevent workpiece out of the guide and ensure a best edging results

可選配PUR裝置，快換式上熔膠，拆換便利、快捷，膠鍋液位高精儀器監測，自動預熔、抽膠粒

Optional PUR unit,quick-change glue pot and glue level sensor-equipped, EVA glue pre-melts and automatically applies

膠箱儲量大，滿足長時間供膠，減少人工加膠頻率

With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application

實現多種形狀的修邊工藝

Various trimming chamfer can be realized.

高硬度，高耐磨性

High-hardness, high wear-resistance

標配40mm銑刀(可選配65mm)，雙銑刀修飾開料后產生的波紋痕跡、毛刺或不垂直等現象，使封邊條與板材的貼合更緊密，提升整體美觀度

Standard with 40mm milling cutter (optional 65mm),Effectively mill off the defects left after cutting, ensuring a close sticking and improving edging results

預熱板件，提升板材與邊帶的粘合效果

Workpiece preheats to improve adhesive results

強力壓合邊帶，提升板材粘合效果

Strong pressure to improve edging result 

通過精密的直線導軌運動，快速切斷板材前后多余邊帶

Transmits along linear guides, and cut off the front and rear tape on workpiece

配備自動潤滑系統，根據運行次數自動注油，確保齊頭機構運行順暢，提高使用壽命

Auto lubrication equipped, automatically applies oils according to running times, ensuring a smooth end-cutting and pro-longing service life 

修整木板上下表面的封邊帶，消除修邊切削時產生的波紋痕跡，提升板材的美觀性

Trim off the cutter marks left on panel surface to ensure for a best edging results

在板材上下表面噴涂清潔劑，祛除余膠和碎屑；在待封邊的板件上下面噴脫模劑，有效防止封邊過程中溢出的熱熔膠粘染板面

Spray the clean agent on top&bottom of workpiece to clean dust/chips off the panel surface，The spray agent can effectively isolate hot-melt glue stick on panel surface

清除殘余膠痕，使板件更加光滑。

Clean off residual glue to ensure the best edge results.