預熱板件，提升板材與邊帶的粘合效果。
Panel preheats to improve a better adhesiveness between panel and tapes.
采用雙銑刀針對開料后產生的波紋痕跡、毛刺或者不垂直等現象，進行再次加工修飾，使得封邊條與板材的貼合更加緊密，整體更美觀。
Trim off the defects left on panel surface after cutting, thus achieving a close sticking and better edge results.
快換式上熔膠，拆換便利、快捷，膠鍋液位高精儀器監測，自動預熔、抽膠粒。
Quick-change glue pot and glue level sensor-equipped, EVA glue pre-melts and automatically applies.
膠箱儲量大，滿足長時間供膠，減少人工加膠頻率。
With the large capacity of glue box, it can satisfy the EVA long-time supply and reduce times in manual application.
強力壓合邊帶，提高封邊粘合效果。
Strongly pressure to improve adhesiveness.
將突出于木板上下表面多余邊帶切除，使封邊帶上下邊緣與木板的上下表面平齊。
Trim excess edge off the panel top and bottom, to have a level and smooth edging results.
消除修邊非直線運動切削過程引起的波紋痕跡，使板材上下部分更加光滑整潔。
Trim off the tools marks, ensuring the best edging quality.
配備定向吹絲功能，有效清除殘余絲帶。
Blowing system equips to clean off the strips /chips.
清除板件上下面的余膠和碎屑。
Remove excess glue and debris from the top and bottom of the board.
智能操作快捷方便。
標配5.5KW電機，開槽深度可達6*20mm。
5.5KW grooving motor, working depth up to 6*20mm.
