德國heidenhain海德漢數顯表|ND720數顯維修heidenhain ND720數顯表、heidenhain ND720數顯表價格、heidenhain ND720數顯表維修、heidenhain ND720海德漢數顯表維修、PGM24627-06數顯表維修、ID：339727-01數顯表維修、ID：339727-02數顯表維修、SN：9383862數顯表維修。海德漢產品區中心：蘇州澤升密機械儀器有限，：，我們將竭誠為你服務。

、德國heidenhain海德漢數顯表|ND720數顯維修產品實物圖：

二、德國heidenhain海德漢數顯表|ND720數顯維修產品型號規格及技術參數：

Part number ID	339727-01
Description	Numerical display unit for 2 axes For encoders with sinusoidal current signals Signal subdivision : max. 1024-fold Functions: 2 datums hole patterns setup functions "edge setting" and "centerline" (with edge finding ) shrinkange compensation MM/inch calculator reference display non-linear axis error compensation over 16 points Accessories included : power connector

Part number ID	339727-02
Description	Numerical display unit for 2 axes For encoders with sinusoidal current signals Signal subdivision : max. 1024-fold Functions: 9 datums hole patterns setup funtions "edge setting" "centerline" circle center (with tool) shrikange compensation MM/inch calculator reference display non-linear axis error compensation over 64 points Accessories included : power connector

單軸應用的ND 280數顯裝置設計用于簡單測量和定位任務，例如圓盤鋸進給，沖壓機行程運動或機床附加回轉工作臺的定位。結構 ND 200系列數顯裝置采用堅固壓鑄鋁殼。防濺的全行程鍵盤適用于車間應用。大型圖形化TFT液晶顯示器顯示測量值、狀態和軟鍵行。功能標配ND 280數顯裝置提供簡單測量和定位任務的基本功能。ND 287信號處理電子裝置（參見量儀用信號處理電子系統樣本）提供更多功能，例如計量值獲取和測量值統計處理。其開關式輸入和輸出可用于簡單的自動化任務。數據接口 ND 280的串口可將測量值傳給PC計算機或打印機，導入和導出參數和補償值表，以及診斷：USB（UART），RS-232-C/V.24

ND 280
Axes	1
Encoder inputs	1 VPP, 11 µAPP or EnDat1): D-sub female 15-pin (automatic interface recognition)
Input frequency	1 VPP: ≤ 500 kHz; 11 µAPP: ≤ 100 kHz
Subdivision factor	4096-fold
Display step2)	Adjustable, max. 9 digits Linear axis: 0.5 to 0.002 µm Angular axis: 0.5° to 0.000 01° or 00°00’00.1
Display	Monochrome TFT screen
Display	Position values, dialogs and input, graphic functions and soft keys
Status display	Operating mode, REF, datum, scaling factor, compensation, stopwatch, unit of measure, soft-key level
Functions	REF reference-mark evaluation for distance-coded or single reference marks 2 reference points Distance-to-go mode Integrated help and diagnostics Remote operation via serial interface
Axis-error compensation	Linear axis: Linear and multipoint over up to 200 points Angle axis: Multipoint linear with 180 compensation points (every 2°)
Data interface	RS-232-C/V.24 USB (UART) port type B
Power connection	100 V to 240 V AC (-10 % to +15 %), 48 Hz to 62 Hz; 30 W
Operating temperature	0 °C to 45 °C (storage temperature –20 °C to 70 °C)
Protection EN 60 529	IP 40, front panel IP 54
Weight	Approx. 2.5 kg

ND 500系列數顯裝置特別適用于二軸或三軸手動銑床、鉆床、鏜床和車床。由于支持TTL編碼器輸入信號，主要用于5 µm測量步距的LS 328和LS 628直線光柵尺。結構ND 500外殼堅固和鍵盤為防濺保護的觸摸鍵，適合車間應用。ND 500系列的單色圖形顯示屏顯示位置值，軟鍵行和其他有用信息。功能zui重要功能都能用功能鍵快速和直接調用。用本地語言顯示的軟鍵和提示信息方便用戶快速完成操作。用待移動距離顯示功能能方便地定位。只需運動到顯示值為零時就可以快速和可靠地達到下個位置。用輸入的參數可以很容易地激活各應用需功能。它還具有陣列孔加工（直線陣列或圓弧陣列）的特殊功能。數顯裝置用于車削模式時可以方便地切換用直徑和半徑顯示。對于帶獨tuidao架的車床，ND 523的合計值顯示功能可顯示滑座與刀架的合計值或分別顯示其位置值。凍結刀具位置功能和退刀功能可以非常容易地將原點設置車削零件上。數據接口數顯裝置的USB接口使數顯裝置可導出測量值和導入或導出參數和表。

ND 522	ND 523
Axes	2 axes from A to Z	3 axes from A to Z and ZS
Encoder inputs	2 x TTL; D-sub female 9-pin	3 x TTL; D-sub female 9-pin
Input frequency	? 100 kHz
Signal period	2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm
Line count	Any
Evaluation	1/2/4-fold
Display step 1)	Linear axis: 1 mm to 0.000 1 mm; 0.005 with LS 328/LS 628 Angular axis: 1° to 0.000 1° (00° 00‘ 01'')
Display	Monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support
Status display	Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch
For milling/drilling/boring	Tool compensation R+, R–
For turning	Radius/diameter display Separate or sum display for Z and ZO
Functions	10 datums 16 tools REF reference mark evaluation for distance-coded and single reference marks Distance-to-go display with nominal position input in absolute or incremental values Contour monitoring Scaling factor mm/inch switching HELP: On-screen operating instructions INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)
For milling/drilling/boring	Calculation of positions for hole patterns (circular patterns as well as linear patterns) Tool radius compensation
For turning	Freezing the tool position for back-off
Error compensation	Axis error: Linear and multipoint over up to 200 points Backlash compensation: For length measurement via ball screw and rotary encoder
Data interface	USB type B connector; 115 200 baud For output of measured values and parameters For input of parameters, remote control of keys and commands
Accessories	Base, mounting arm
Power connection	100 V to 240 V AC (–15 % to +10 %), 48 Hz to 62 Hz; 54 W
Operating temperature	0 °C to 45 °C (storage temperature –20 °C to 70 °C)
Protection EN 60 529	IP 40, front panel IP 54
Weight	Approx. 2.6 kg
1) Depends on the signal period or line count of the connected encoder

ND 780數顯裝置特別適用于3軸的銑、鉆、鏜床和車床。獨立I/O單元的開關式輸入/輸出功能可執行簡單自動化任務。結構 ND 780數顯裝置的立面為堅固外殼帶防濺的全行程鍵盤，適合車間應用。它的單色純平顯示器顯示位置值、對話信息、輸入信息、圖形功能以及圖形定位信息。功能ND 780數顯裝置突出特點是它的簡易語言對話幫助功能。用待移動距離顯示功能能方便地定位。只需運動到顯示值為零時就可以快速和可靠地達到下個位置。用輸入的參數可以很容易地激活各應用需功能。它還具有陣列孔加工（直線陣列或圓弧陣列）的特殊功能。用找邊器快速、確地確定原點。ND 780數顯裝置提供特殊探測功能。數顯裝置用于車削模式時可以方便地切換用直徑和半徑顯示。數顯裝置特別支持帶獨立刀架的車床：合計顯示功能顯示Z軸和刀架的合計值或分別顯示這兩個值。為設置原點，只需觸碰工件并凍結刀具位置。然后退刀和用刀具測量工件。數據接口 ND 780的RS-232-C/V.24串口可將測量值傳給PC計算機或打印機，進行參數、補償值表的輸入/輸出和診斷。

ND 780
Axes	Up to 3 axes from A to Z and ZO, ZS
Encoder inputs	3 x 1 VPP or 11 µAPP; D-sub female 15-pin (automatic interface recognition)
Input frequency	?≤ 100 kHz
Signal period	2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm
Line count	Any
Subdivision factor	Max. 1024-fold
Display step 1)	Linear axis: 1 mm to 0.000 1 mm Angular axis: 1° to 0.000 1° (00° 00‘ 01'')
Display	Monochrome flat screen for position values, dialog and input displays, graphic functions and graphic positioning support
Status display	Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch
For milling/drilling/boring	Tool compensation R+, R–
For turning	Radius/diameter display Separate or sum display for Z and ZO
Functions	10 datums 16 tools REF reference mark evaluation for distance-coded and single reference marks Distance-to-go display with nominal position input in absolute or incremental values Scaling factor mm/inch switching HELP: On-screen operating instructions INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)
For milling/drilling/boring	Calculation of positions for hole patterns (circular patterns as well as linear patterns) Tool radius compensation Probing function for datum acquisition with the KT edge finder: "Edge," "Centerline" and "Circle center"
For turning	Freezing the tool position for back-off Setup functions for datum setting with the tool
Error compensation	Axis error: Linear and multipoint over up to 200 points Backlash compensation: For length measurement via ball screw and rotary encoder
Data interface	RS-232-C/V.24 300 to 115 200 baud For output of measured values and parameters For input of parameters, remote control of keys and commands
Switching I/O	Two inputs (pulse or contact) for measured value output 1 input for KT edge finder 1 input for edge finder with contact triggering Further input/outputs over the IOB 49 input/output unit
Accessories	KT edge finder (for milling) tilting base, handle, tilt/swivel mount, pivot arm
Power connection	100 V to 240 V AC (–15 % to +10 %), 48 Hz to 62 Hz; 30 W
Operating temperature	0 °C to 45 °C (storage temperature –20 °C to 70 °C)
Protection EN 60 529	IP 40, front panel IP 54
Weight	Approx. 2.6 kg
1) Depends on the signal period or line count of the connected encoder

POSITIP 880是個多功能數顯裝置，主要用于6軸銑床、鉆床、鏜床和車床。獨立I/ O單元的開關式輸入/輸出功能可執行簡單自動化任務。結構 POSITIP 880數顯裝置的立面為堅固外殼并帶防濺的全行程鍵盤，適合車間應用。它的大型、清晰易讀的彩色純平顯示器顯示的互動菜單，幫助操作人員輕松完成有操作。功能 POSITIP的功能優于ND 780數顯裝置的功能。POSITIP支持任何軸組合，其圖形輪廓監測和放大功能幫助操作人員進行二維加工。銑削模式中，可加工和粗加工矩形型腔，而且車削時考慮加工余量。 POSITIP編程功能是非數控機床進行小批量生產的理想選擇：它的存儲器中，個程序可保存多達999個程序段。編程方法可以是步步地輸入或通過實際位置值獲取功能編程（獲取實際位置編程）。它的子程序功能允許只輸入次同個工件上重復性加工順序。固定循環可縮短程序長度和節省編程時間。數據接口 POSITIP 880的RS-232-C/V.24串口可將測量值傳給PC計算機或打印機，進行參數、補償值表的輸入/輸出和診斷。也可以用并行Centronics接口進行純測量值輸出。

POSITIP 880
Axes	Up to 6 axes from A to Z and ZO, ZS
Encoder inputs	6 x 1 VPP, 11 µAPP or EnDat 2.1; D-sub female 15-pin (automatic interface recognition)
Input frequency	≤ 100 kHz
Signal period	0.128 µm, 2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm
Line count	Any
Subdivision factor	Max. 1024-fold
Display step 1)	Linear axis: 1 mm to 0.005 µm Angular axis: 0.01° to 0.000 1° (00° 00‘ 01‘‘)
Display	Color flat screen for position values, dialog and input displays, graphic functions, graphic positioning support and contour monitoring
Status display	Operating mode, REF, reference-point number, tool number, inch, scale, feed-rate display, stopwatch
For milling/drilling/boring	Tool compensation R+, R–
For turning	Radius/diameter display; separate or sum display for Z and ZO
Functions	REF reference-mark evaluation for distance-coded or single reference marks Distance-to-go mode, nominal position input (absolute or incremental) Scaling factor Contour monitoring with magnify function Any axis combinations HELP: On-screen operating instructions INFO: Stopwatch, pocket calculator, cutting data calculator (for milling), taper calculator (for turning)
For milling/drilling/boring	99 datums and 99 tools Calculation of positions for hole patterns (circular patterns as well as linear patterns) Tool radius compensation Probing function for datum acquisition with the KT edge finder: "Edge," "Centerline" and "Circle center" Positioning aids for milling and the roughing out of a rectangle pocket
For turning	1 datum, 99 tools Freezing tool position for back-off Oversize allowances
Programming	Up to 999 program blocks per program; sub programming capability with turning and mirroring; teach-in programming
Cycles For milling/drilling For turning	Line segments, circular arcs, chamfers, circular and linear hole patterns, rectangular pockets Line segments, circular arcs, chamfers, multipass
Error compensation	Linear and multipoint, up to 128 measuring points
Interfaces Serial Parallel	RS-232-C/V.24 300 to 115 200 baud For output of programs, measured values and parameters For loading of programs and parameters Centronics for output of measured values
Switching I/O	Via IOB 89 external input/output unit 1 input for KT edge finder
Accessories	KT edge finder (milling) tilting base, tilt/swivel mount, pivot arm
Power connection	100 V to 240 V AC (–5 % to +10 %), 48 Hz to 62 Hz; 35 W
Operating temperature	0 °C to 45 °C (storage temperature –20 °C to 70 °C)
Protection EN 60 529	IP 40, front panel IP 54
Weight	Approx. 3.2 kg
1) Depends on the signal period or line count of the connected encoder

ND 1200 R徑向鉆孔數顯裝置易于操作，是適用于常規和速徑向鉆孔機床應用的*數顯裝置。機床運動用徑向臂中的直線光柵尺和旋轉編碼器或立柱的摩擦輪系統測量。襯套中的附加編碼器也能用于測量和顯示鉆孔深度。結構ND 1200R徑向鉆孔數顯裝置采用壓鑄鋁殼，設計堅固，配防濺全行程鍵盤。單色平板圖形顯示器顯示位置值，簡易語言對話和提示以及顯示圖形功能。功能 ND 1200 R數顯裝置允許隨時切換坐標（半徑R，角）?）與直角坐標（X，Y）顯示。用它的探測功能能快速確定工件原點和工件方向。個基礎功能是待移動距離的定位功能：輸入名義位置值—也就是鉆孔坐標—X，Y值；徑向鉆孔數顯裝置單獨顯示沿角度軸和徑向軸到目標位置的待移動距離，也就是基于機床坐標系的尺寸值。加工陣列孔時，例如螺栓孔圓和矩陣式或框式直線陣列孔時，ND 1200R能自動計算位置值。ND 1200 R的編程功能能方便地加工重復性工件和陣列孔工件。接口RS-232-C/V.24和USB串口用于保存程序和更新軟件。配徑向鉆孔徑向臂的角度位置通常用旋轉編碼器和摩擦輪系統—如果度要求—用ROD角度編碼器或旋轉編碼器測量。鉆頭位置以及根據需要的主軸行程用LS直線光柵尺測量。KT找邊器用于校準機床和根據需要設置工件。

ND 1202 R	ND 1203 R
Axes	2 from A to Z	3 from A to Z
Encoder inputs	TTL (D-sub female 9-pin) or 1 VPP (D-sub female 15 pin)
Input frequency	≤ 200 kHz
Signal period	Any
Line count	Any
Subdivision factor	TTL: Max. 4-fold 1 VPP: Max. 40-fold
Display step 1)	Adjustable, max. 7 digits
Display	5.7” monochrome flat-panel display for position values, dialogs and inputs, and soft keys
Functions	Conversion of Cartesian coordinates (X,Y) to polar coordinates (R,A) XY/RA switch-over Alignment function REF reference-mark evaluation for distance-coded or single reference marks Distance-to-go display in machine coordinates R and A mm/inch switching Absolute-incremental display Calculation of positions for hole patterns (circular patterns as well as linear patterns) Probing functions for workpiece orientation and reference-point acquisition with KT edge finder: "Edge," "Centerline" and "Circle center"
Programming	Hole patterns with a total of 999 hole positions
Cycles	Hole patterns (circular and linear patterns) with max. 100 positions
Error compensation	Linear axis-error compensation as part of calibration
Data interface	RS-232-C/V.24; 300 to 115 200 baud USB type A
Switching inputs	Zero reset, measured value output (e.g. by foot switch) Edge finder (through universal touch probe interface)
Accessories	Mounting arms, KT-130 edge finder, foot switch
Power connection	100 V to 240 V AC (–15 % to +10 %), 47 Hz to 63 Hz; 30 W
Operating temperature	0 °C to 45 °C (storage temperature –20 °C to 70 °C)
Protection EN 60 529	IP 40
Mounting	Tilting base or mounting base
Weight	Approx. 1.6 kg
Please select when ordering 1) Depends on the signal period of the connected encoder as well as the subdivision factor

ND 5023
Axes	Up to 3 axes
Encoder inputs	3 x TTL D-sub, female, 9-pin
Input frequency	≤ 500 kHz
Signal period	2 µm, 4 µm, 10 µm, 20 µm, 40 µm, 100 µm, 10 240 µm, 12 800 µm
Line count	Any
Display step1)	Linear axis: 1 mm to 0.000 1 mm; 0.005 mm with LS 328 C/LS 628 C Angular axis: 1° to 0.000 1° (00° 00‘ 01'')
Display	7-inch color wide screen (15:9), resolution 800 x 480 pixels for position values, dialog messages, input and graphic functions
Functions	Dialog-guided installation User and data management Moving axis highlighted 10 presets, 16 tools Reference mark evaluation for distance-coded and single reference marks Distance-to-go display with nominal position input in absolute or incremental values Graphic positioning aid Scaling factor mm/inch switchover Integrated help system Stopwatch, calculator
For milling/drilling/boring	Calculation of positions for hole patterns (bolt circles, linear hole patterns) Tool radius compensation Cutting data calculator
For turning	Freeze tool position during retraction Sum display of axes in the top slide Inclined top slide Taper calculator
Error compensation	Linear (LEC) and segmented linear (SLEC) over up to 200 points
Data interface	USB 2.0 type C For output of measured values and parameters to a USB stick or PC For input of parameters, remote control of keys and commands
Accessories	Single-position tilting base, multi position holder, mounting frame, protective cover, power cable
Power connection	AC 100 V (–10 %) to 240 V (+5 %), 50 Hz to 60 Hz (±5 %), ≤ 33 W
Operating temperature	0 °C to +45 °C (storage temperature –20 °C to +70 °C)
Protection EN 60 529	IP54, back panel IP 40
Mounting	Single position tilting base, multiposition holder; compatible fastening systems to VESA MIS-D 100
Mass	≈ 1.7 kg
1) Depends on the signal period or line count of the connected encoder