美國Cannon SimpleVIS便攜式快速全自動運動粘度測定儀9725-S10

SimpleVIS®是一個樣本,便攜式粘度計進行現場測試。其精度接近D445，易于使用，堅固耐用。可用粘度計管蓋粘度范圍的2毫米²/ s²/ s(cSt)到700毫米(cSt)在兩個選擇之間的溫度40°C和100°C

SimpleVIS® is a single sample, portable viscometer for on-site testing. With near D445 precision, it is easy to use, rugged and fast. Available viscometer tubes cover a viscosity range of 2 mm²/s (cSt) to 700 mm²/s (cSt) at two selected temperatures between 40 °C and 100 °C.

美國Cannon SimpleVIS便攜式快速全自動運動粘度測定儀9725-S10

Common Applications

• Product chain of custody monitoring
• Contamination checks
• Point of use testing
• Industrial lube blending
• Packaging & distribution of petroleum products
• Petroleum terminals
• Remote used oil predictive maintenance
• Power plant applications
• Remote mining applications

Automated and precise determination of direct kinematic viscosity at 40 °C or 100 °C

• Provides true kinematic viscosity measurement without the need to correlate dynamic viscosity data
• Viscosity range:
  • Standard range tube provides viscosities from 10 mm²/s (cSt) to 700 mm²/s (cSt) at 40 °C and 5.5 mm²/s (cSt) to 200 mm²/s (cSt) at 100 °C
  • Low range tube provides viscosities from 2 mm²/s (cSt) to 140 mm²/s (cSt) at 40 °C and 100 °C
• Follows ASTM D7279 and offers near ASTM D445 precision due to exceptional temperature control (± 0.05 °C)
• Rapid cycle time of 3 to 5 minutes from sample injection to test result

Portable, self-contained and dependable

• Weighs approximay 10 lb and takes up less space than a coffee maker
• Does not require a PC or any external utilities
• Optional power inverter enables the instrument to run off of a 12 Vdc vehicle charging port
• Rugged, reliable design has only two moving parts

Simple & safe operation

• Graphical touch screen display provides step by step test instructions
• Factory calibrated; no switches, gauges or valves to adjust
• Solid-state bath eliminates need for liquid bath
• Intrinsically safe unit operates on 12 Vdc power
• Optional printer available

Economical

• Low cost of ownership
• Requires only 10 mL to 15 mL of solvent and 0.5 mL of sample per test
• No sample vials required; sample is injected directly into the instrument

Custom calibration at any two temperatures between 40 °C and 100 °C is available on request