| 日本PEACOCK千分表 For use in electrically noisy environments. For applications requiring extra long cables. (10 to 50 meters are available) |
 |
日本PEACOCK千分表
Rectangular wave output type
| Photo 1 | Dimensions | Output wiring | Extension cables |
| Specifications | ||
| Model | D-10N | D-20N |
| Range | 10mm | 20mm |
| Resolution | 0.005mm / 0.01mm | |
| Accuracy (excluding quantized error) | 0.01mm | 0.01mm |
| Measuring force | Less than 1.0N | Less than 1.2N |
| Cable length | 2m | |
| Mounting method | ? 8mm stem or 6.5mm hole on lug back | |
| Contact point | M2.5 × 0.45 S? 2.4mm cooper (X-2) | |
| Output Signal | 90? phase difference, 20?m pitch (R03-PB8M Tajimi connector) Rectangular wave (Low=0V High=8V) | |
| Features | Recommended for locations where cable extension (10 to 50 meters) is necessary. Recommended for use in electrically noisy environments. | |
| Options | Extension cable (2, 3, 5 and 10meters are standard length, other lengths are made to order.) If a longer cable is required for the linear gauge itself, we can also supply it as a special order. | |
| Wiring precaution | Signal Lines should be wired through a separate duct from other electrical lines. | |
所有評論僅代表網友意見，與本站立場無關。