北京龍天韜略科技有限公司代理德國耶拿Analytik Jena原子吸收光譜耗
材配件、TOC分析儀/總有機碳分析儀耗材、有機元素分析儀耗材、碳硫
分析儀（紅外碳硫儀）耗材配件、鹵素分析儀/水質鹵素分析儀耗材。
耶拿contrAA800連續光源原子吸收光譜儀
耶拿contrAA® 600連續光源 石墨爐原子吸收光譜儀
耶拿ZEEnit®650P高級石墨爐原子吸收光譜儀
耶拿ZEEnit®700P火焰石墨爐原子吸收光譜儀
耶拿contrAA®700連續光源 火焰/石墨爐原子吸收光譜儀
耶拿novAA®350全自動火焰原子吸收光譜儀
耶拿contrAA®300連續光源 火焰原子吸收光譜儀
耶拿novAA®400P智能火焰－石墨爐原子吸收光譜儀
德國耶拿multi N/C ®2100 TOC
德國耶拿 multi N/C® 3100 TOC
德國耶拿multi EA® 5000碳、氮、硫、氯 元素分析儀
德國耶拿 multi EA® S 5000碳、氮、硫、氯 元素分析儀
德國耶拿multi EA® 4000碳、硫、氯 元素分析儀
德國耶拿multi X® 2500總有機鹵素分析儀
原裝空心陰極燈/石墨管/霧化器/樣品杯/進樣針/進樣器/進樣墊/注射器/TOC燃燒管等耗材配件，常用耗材配件現貨供應，訂貨貨期短，到貨快，原裝，質量保證。
部件號如下：
配套使用注射器/進樣針/進樣器/進樣針
適用于德國耶拿EA3100和EA5000硫氮氯分析儀器現貨供應 貨號如下：
1、產品貨號402-886.311
產品描述Syringe graduated 500 μl with removable needle for manual injection
2、產品貨號402-889.589
產品描述Syringe 10 μl, for Autoinjector, with removable needle
3、產品貨號402-889.590
產品描述Syringe 20 μl, for Autoinjector, with removable needle
4、產品貨號402-889.591
產品描述Syringe 40 μl, for Autoinjector, with removable needle
5、產品貨號402-889.592
產品描述Syringe 100 μl, for Autoinjector, with removable needle
6、產品貨號402-823.080
產品描述100μl syringe H ?8 RN 0,64(G23s)c51
7、產品貨號402-886.305
產品描述500μl SYR H ?8Vent 1/4"-28 RN 1,0x0,7c51
8、產品貨號402-823.056
產品描述Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
9、產品貨號402-823.106
產品描述Syringe 20 μl, for Autoinjector, with removable needle
10、產品貨號402-886.306
產品描述Needle 1 mm x 0.7 mm; for all types of syringes, 3 pieces
11、產品貨號402-889.186
產品描述Removable special needles, set of 3 pieces
407-218.852 Polystyrene-sample cup 1,5 ml; 1,000 pieces
407-230.073 Pack of 10 pieces PP-sample cup, 5 ml
407-400.057 Pack of 100 pieces Sarstedt PP- sample cups with 15 ml
407-400.054 Pack of 50 pieces Sarstedt PP- sample cups with 30 ml
407-402.926 Pack of 30 pieces Sarstedt PP- sample cups with 50 ml
Consumables multi EA 5000
effective from 01.01.2010
PriorityOrder numberDescription
Consumables general
402-889.527Auto-Protection valve assembly, complete
no picture available
B402-889.091Lids for sample vials, 2 ml, set of 500 pieces
402-889.652Flow test kit
no picture available
A402-889.182Wires for cleaning syringe needles, set of 10 pieces
402-007.513FAST connector, 1 piece
(adaptor angeled for gas tubings, black)
402-801.317Fuse for furnace unit
T 10 A H, 20 mm
402-820.044Air filter for membrane dryer pump (at rear side of multi EA 5000), 1 piece
402-889.510Multi purpose combustion tube
B402-825.045Tweezers, straight, truncated
B402-889.092Sample vials, 2 ml, set of 100 pieces
(for sample rack with 112 positions)
402-889.558PTFE filter plate, d = 25 mm (Auto protection replacement
filter)
Set of 5 pieces
402-820.129Oxygen and argon gas supply tubing
FEP, OD 6 mm (sold by meter), 1 m
A402-889.306Screw cap with hole, GL 18
402-889.557Sealing disk, 17 mm, for plastic cap GL 18, Set of 5 pieces
402-889.583Special sealing 12 mm
(FAST connector at outlet of multi purpose combustion tube)
402-822.118Heat resistent gloves, 1 pair
Sampling modules
MMS 5000
402-812.374Replacement screw
(mounting of autosampler on the basic unit/ ABD)
A402-823.079Removable needles for 50 and 100 μl syringes, set of 3 pieces
402-886.248Waste hose
A402-889.206Septum for rinsing vessel
402-889.533Syringe 50 μl, with removable needle, without markings
402-889.534Syringe 100 μl, with removable needle, without markings 402-889.547Gripper for sample boats
Autoinjector
402-889.589Syringe 10 μl, for Autoinjector, with removable needle
recommended for higher element concentrations and systems with carbon module
402-889.592Syringe 100 μl, for Autoinjector, with removable needle
402-889.590Syringe 20 μl, for Autoinjector, with removable needle
recommeded for higher element concentrations, for systems with carbon module and for systems with only one detector module (N or S)
402-889.591Syringe 40 μl, for Autoinjector, with removable needle
recommended as standard syringe for N/S systems
A402-889.186Removable special needles, set of 3 pieces
Manual Boat Drive - MBD
no picture
available
402-815.839Sealing for sample port MBD
402-889.671Feed tube for MBD
402-889.672Hook for MBD
402-889.670MBD coupling tube, glass
402-889.674Quartz boat, 40 mm x 9 mm, set of 10 pieces
402-889.560Set of sealing elements horizontal 402-889.673Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Automatic boat drive - ABD
402-889.551ABD coupling tube, glass
402-886.236Sealing for sample port ABD
A402-881.028Finger-Tight-Set, 1/8" for tubing, 5 ferrules and 5 screwing
A402-889.073Feed tube, for MVS shunt/ABD
A402-889.066Hook, for MVS shunt/ABD
suitable from MVS serial number 509 046 and higher
402-815.838O-ring 14 mm x 4 mm for ABD
402-889.674Quartz boat, 40 mm x 9 mm, set of 10 pieces
402-889.560Set of sealing elements horizontal
A402-889.050Septum; 12.5 mm; set of 5 pieces
402-889.673Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
A402-889.039Adsorption material, set of 3 pieces
Gas Sampling System - GSS
B402-889.148Replacement septum for gas sampling bag 10 l, 1 piece
402-820.057Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
402-820.123Ferrule for injection needle, vertical operation, 1 piece
B402-889.147Gas sampling bag 10 l for GSS and GSS type C, 1 piece
A402-889.180Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
no picture
available
402-889.423Septum perforated for special needle PEEK in horizontal operation mode
A402-890.018Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
LPG Module and GSS/LPG combi module
402-889.439Bubble vessel
402-820.057Ferrule 1/16", 1 piece
multi EA 5000: Ferrule for special needle (PEEK), horizontal operation, 1 piece
402-820.123Ferrule for injection needle, vertical operation, 1 piece
A402-889.180Injection head for GSS, LPG and GSS/LPG, vertical operation, complete
A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation mode
A402-815.058Lab-type screw joint D 3.2 - GL 14, complete (red)
multi EA 5000: for bubble vessel
A402-881.116O-ring, i.d. = 6 mm x 3 mm
multi EA 5000: for screw cap GL 14 bubble vessel
no picture
available
402-889.423Septum perforated for special needle PEEK in horizontal operation mode
A402-890.018Special needle for GSS,LPG and GSS/LPG, horizontal operation mode, PEEK
Detection
Sulfur / nitrogen / carbon detection
no picture
available
402-889.061Extended Sulfur Calibration Kit; 0,05 - 10 mg/l
no picture
available
402-889.060Extended Nitrogen Calibration Kit; 0,05 - 10 mg/l B402-889.070Sulfur Calibration Kit (0.1 - 10 mg/l) incl. blank
B402-889.167Sulfur Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
B402-889.164Sulfur Calibration Kit (100 - 500 mg/l)
B402-889.069Nitrogen Calibration Kit ( 0.1 - 10 mg/l) incl. blank
B402-889.165Nitrogen Calibration Kit (10 - 100 mg/l) incl. blank
B402-889.162Nitrogen Calibration Kit (100 - 500 mg/l)
A402-823.048Membrane dryer
B402-815.030O-ring 3.0 mm x 1.5 mm (3 mm x 6 mm) set of 10 pieces
multi EA 5000: sealing for inner part of membrane dryer
Sulfur Coulometer
A402-889.313Absorber tube for Sulfur coulometer, glass
402-820.110Connecting hose 1/8", (sold by meter), 1m
A402-889.302Diaphragma for titration cell of Sulfur coulometer
A402-889.308Sealing for screw cap with hole, GL 32, Sulfur coulometer
A402-889.309Sealing for screw cap with hole, GL 14, Sulfur coulometer
402-889.307Sealing for screw cap with hole, GL 18, Sulfur coulometer
A402-889.311Gas introduction tube for titration cell of Sulfur coulometer, glass
A402-520.137Glass screw joint (gray)
multi EA 5000: (Screw joint for tube 8 mm)
A402-889.301Indicator electrode for titration cell of Sulfur coulometer
A402-889.303Cathode for titration cell of Sulfur coulometer
A402-889.310Stirrer bar, titration cell, Sulfur coulometer
402-884.015Packet with one charge of silver wool
A 402-889.305 Screw cap with hole, GL 14 for gas introduction tube and electrodes, Sulfur coulometer
A402-889.306Screw cap with hole, GL 18
A402-889.304Screw cap with hole, GL 32 Diaphragma, Sulfur coulometer
A402-889.314Septa for titration cell for Sulfur Coulometer, set a 50 pieces
402-889.300Titration cell for Sulfur coulometer, glass
A402-889.312Fitting GL zz, for absorber tube, sulfur coulometer
TC/TOC-Module
B402-886.311Syringe graduated 500 μl with removable needle for manual injection
B402-885.019Halogen absorber, complete with U-tube
402-810.050Halogen absorber filling (copper- and brass wool)
A402-885.017High-temperature mat, set of 3 pieces
A402-823.056Needle; 0.63 mm x 0.35 mm; for all types of syringes; set of 3 pieces
multi EA 5000: removeable injection needle for vertical operation
mode
402-889.657Condensation coil
no picture available
B402-810.059Special catalyst platinum, sufficient for 5 refills
A402-810.048Special catalyst platinum, one refill
B402-886.318Sample vials, 8 ml
50 mm x 18 mm, 125 pieces
A402-884.005Pump hose for peristaltic pump, waste
A402-881.006Quartz glass cullet, coarse grains, packet of 80 g
A402-825.044Quartz wool, 1 packet
402-889.659Septum TIC vessel
no picture available
402-889.658Septum combustion tube
no picture available
402-881.245Set of TC prefilter and water trap
402-889.594Syringe 250 μl with vent and removable needle
(for autosampler)
402-889.593Syringe 500 μl with vent and removable needle
(for autosampler)
no picture
available
402-889.656TIC vessel
A402-825.150U-tube, o.d. = 11 mm, without filling for halogenabsorber
(without connections)
no picture
available
402-889.655Combustion tube
Chlorine Detection
402-815.831Hose to connect suction extractor at workplace or vent
lengh 70 cm
402-889.549Connecting part (metal) for gas transfer line
with outside thread
402-825.123Beaker for sulfuric acid vessel
402-889.561Replacement hose for heated gas transfer line
402-820.053Ferrule for connecting part (metal)
for gas transfer line with outside thread
402-820.055Ferrule for screw joint
gas transfer line with inside thread
402-889.559Gas transfer hose
no picture
available
no picture
available
B402-889.071Chlorine Calibration Kit ( 0.1 - 10 mg/l) incl. blank B402-889.166Chlorine Calibration Kit (10 - 100 mg/l) incl. blank
no picture
available
B402-889.163Chlorine Calibration Kit (100 - 500 mg/l)
A402-520.177ferrule set, 1/4" TFE
402-30003Ferrule set, 1/8" PTFE
402-825.124Petri dish for sulfuric acid vessel
402-889.569Tubing inside sulfuric acid vessel with ferrule
402-889.508sulfuric acid vessel with outlet
402-889.507Safety cowl for the sulfuric acid tank
402-825.108Funnel for sulfuric acid vessel
402-889.573Connector sulfuric acid vessel
A402-30031Swagelok screw fitting, 1/4" onto 1/8", PTFE
Chlorine detection with chlorine module high sensitive
B402-890.007Storage vessel for sensor electrode
A402-889.085Mounting to connect suction extractor at workplace, NS
14.5 brown glass
402-99998preamplifier for sensor electrode
A402-889.123Gas introduction tube
A402-889.124Set of rubber plugs; 1 x NS14, 1 x NS7
A402-889.112Internal electrolyte sensor electrode, 50 ml
A402-815.023Magnetic stirring bar, PTFE, 30 mm x 6 mm, 1 piece
A402-889.006Platinum electrode
A402-889.184Electrolyte bridge
B402-889.110Salt solution to make up 100 ml electrolyte
A402-889.002Sensor electrode 402-889.536Silver electrode
Chlorine detection with titration cells sensitive and high concentration
402-889.538Storage vessel for combination electrode
B402-880.605Disposable tube 18 mm x 6 mm, filled
packet of 10 pieces, for AOX determination (column method)
402-890.610Disposable quartz tubes 18 x 6, filled; set á 100 pieces for AOX determination (column method)
A402-880.211Combination electrode (ceramic)
A402-815.022Magnetic stirring bar, PTFE, 15 mm x 6 mm, 1 piece
402-889.673Sample boat, special, with downholder for special applications
(e. g. AOX by batch method, EC/OC determination), 10 pieces
Warranty claims and claims related to the fulfillment of manufacture's technical specification can only be accepted by using original Analytik Jena components, spares and consumables.
Specifications and order numbers are subject to changes due to further technical development.
Prices are quoted exclusive of value added tax.
Purchase is subject to the General Terms and Conditions of Analytik Jena AG.
所有評論僅代表網友意見，與本站立場無關。