Hatch Cover tape keeps out moisture, weather, sound and fumes from your valuable cargo, the blue liner ensures a tight seal when installed according instructions.It has an excellent weather resistance to salt and weather conditions.This particular tape can installed between 5 and 40 °C and will stａnd from -15 to 70 °C.
艙蓋膠帶可防止濕氣，天氣，聲音和煙霧從您的貴重貨物，藍色襯里確保一個緊密的密封時，根據說明安裝。它對鹽和天氣條件有的耐候性。這種特殊的膠帶可以安裝在5到40°C之間，溫度在-15到70°C之間。
Hatch cover tapes is to protect the metal hatch covers on carriage ships against leakage of water into the carriage area. Extreme weather conditions often damage hatch covers making them prone to leakage which may lead to the damage of goods being shipped.
艙口蓋膠帶是用來保護運輸船上的金屬艙蓋，防止水滲漏到車廂區域。天氣條件經常損壞艙蓋，使艙蓋容易發生泄漏，從而可能導致所裝運貨物的損壞。
| IMPA CODE | DESCRIPTION | UNIT |
| 232452 | Hatch Cocver Tape (Roll Tape) 100mmx2mmx20mtr | Roll |
| 232453 | Hatch Cocver Tape (Roll Tape) 150mmx2mmx20mtr | Roll |
? Characteristics:
20 meters of self-adhesive SBS bitume rubber compound
coated to a modified blue HDPE liner and release PE Liner.
? Temperature resistance:
Between -15 to +70 C.(Installation should be under from +5 C to +40 C)
? Shelf life:
24 months properly stored.
? 特點：
20米自粘SBS瀝青膠料
涂于改性藍色HDPE襯里和脫模聚乙烯襯里上。
? 耐溫性：
在-15到+70攝氏度之間。（安裝溫度應在+5℃至+40℃之間）
? 保質期：
存放24個月。
? USING
1. Being the surface free from dirts&salt on which wouldlbe applied.
2. The surface must stay dry, before applying the tape.3. Under cold weather, the tape should be warm up with a torch for the best adhesive performance.The flame should be applied to the black surface after removing the release liner.Always be careful not to use a torch in fire danger areas.
4. Immediately after heating apply pressure to stick the tape onto the surface before the tape cool.This will ensure the best condition for adhesion
? 使用方法
1.表面無污垢和鹽分，可用于表面。
2.貼膠帶前，表面必須保持干燥。
3.在寒冷的天氣下，膠帶應該用手電筒加熱，以獲得粘合劑表演。那個移除釋放裝置后，應在黑色表面上使用火焰班輪?？偸切⌒牟灰诨馂奈ｋU區域使用手電筒。
4.貼上加熱膠帶后，立即貼在加熱表面,這個將確保粘合條件。
所有評論僅代表網友意見，與本站立場無關。