TP8485E
± 18K ESD Protection, Full Fail-Safe RS-485 Transceiver
Datasheet
TP8485E.pdf
- 描述
- 技術文檔
- 工具與軟件
- 設計資源
- 樣片及購買
產品特性
Exceeds Requirements of EIA-485 Standard
Hot Plug Circuitry - Tx and Rx Outputs Remain Three-State During Power-up/Power-down
Data Rate: Up to 250 kbps
Full Fail-safe (Open, Short, Terminated)Receivers
Up to 256 Nodes on a Bus (1/8 unit load)
Wide Supply Voltage 3V to 5.5V
SOIC-8 Package for Backward Compatibility
Bus-Pin Protection：±18 kV HBM protection
典型應用
E-Metering Networks
Industrial Automation
HVAC Systems
Process Control
DMX512-Networks
Battery-Powered Applications
產品概述
The TP8485E are 3V~5.5V powered transceivers that meet the RS-485 and RS-422 standards for balanced communication. Driver outputs and receiver inputs are protected against ±18kV ESD strikes without latch-up.Transmitters in this family deliver exceptional differential output voltages (2.5V min/5Vcc), into the RS-485 required 54Ω load, for better noise immunity, or to allow up to eight 120Ω terminations in “star" topologies.
These devices have very low bus currents so they present a true “1/8 unit load" to the RS-485 bus. This allows up to 256 transceivers on the network without using repeaters. Receiver (Rx) inputs feature a “Full Fail-Safe"design, which ensures a logic high Rx output if Rx inputs are floating, shorted, or on a terminated but undriven bus. Rx outputs feature high drive levels- typically 25mA @ VOL= 1V (to ease the design of optocoupled isolated interfaces).The TP8485E is available in an SOIC-8 and MSOP-8 package, and is characterized from –40°C to +125°C.
所有評論僅代表網友意見，與本站立場無關。