三次元型號：半自動橋式三坐標測量機 CROMA 500*600*400mm
三坐標測量儀測量范圍：
- 主要包括測量：尺寸精度、定位精度、幾何精度及輪廓精度等。
任何工件的形狀幾乎都是由三維空間點組成的，所以所有的幾何量測量都可以歸納成三維空間點的測量，故此精確地進 行空間點坐標的采集，是測定所有幾何形狀的基礎。
- 主要用于工件的三維測量，例如：汽車零部件制造，模具刀具，3C電子產品，注塑精密加工行業等。
CROMA 564 三次元的特點：
- X向橫梁采用超高剛性精密鋁合金橫梁，通過減輕運動負荷從而提高了整機的性能，是保證穩定性和剛性的結構設計。
X beam has adopted the ultra rigidprecise aerometal. This structure is the best solution to lighten main carriage’s weight and improve main carriage’s stability and rigidity, so can greatly improves CMM’s performance.
- Y軸采用海克斯康獲得的整體燕尾型導軌，提高了測量機的精度和重復性。
Patented precision-machined dovetail guideway in Y axis improves CMM’s accuracy and repeatability.
- 三軸均采用同步帶驅動，結構緊湊、不打滑、速度快、噪音低、易維護。
All machine axes’ transmission mode is timing belt, whose compact, nonskid structure makes it has excellence of high speed, low noise and easy maintenance.
- Z軸采用可調氣動平衡，運動平穩；并可在緊急情況下自動制動，保證安全。
Pneumatic counterbalance (adjustable) for Z axis, which makes Z axis operate stably, with automatic brake on emergency condition and keep CMM in safety.
- 三軸均采用TESA高精度光柵。
TESA High-precision optical scale is used for all the three axesaxes are equipped with the scales.
- 電機遠程放置減少了移動質量，提高了速度，也避免了電機發熱對機器性能的影響。
Remote mounted drive motors reduce moving mass for faster setting, and dissipate heat away from the machine frame.
- 配備的坐標測量軟件，可滿足任何通用車間檢測需要。
Equipped with the powerful measuring software which second to none, Inspector can handle any common shop measurement and inspection tasks.
半自動三坐標主要技術參數：
| 行程范圍(mm) Measuring Strokes | 外形尺寸(mm) Overall Dimension | 主機重量 (Kg) Machine Weight | 被測工件重量 (Kg) Max. Part Weight | |||||
| X | Y | Z | Lx | Ly | Lz | |||
| 500 | 600 | 400 | 1050 | 1535 | 2247 | 590 | 300 | |
| 精度指標：（根據ISO10360-2坐標測量機的性能評定標準）(Accuracy is according to ISO 10360 – 2) | ||||||||
| 允許示值誤差MPEE (mm) Maximum permissible error of indication of a CMM for size measurement (mm) | 允許探測誤差MPEP (mm) Maximum permissible Probing Error(mm) | |||||||
| 2.8+L/300 | 3.5 | |||||||
| 動態性能Dynamic Performance | ||||||||
| 3D運動速度(mm/s) 3D positioning speed | 3D運動加速度(mm/s2) 3D acceleration | |||||||
| 520 | 1730 | |||||||
三坐標測量機控制系統主要技術參數：Technical Characteristics
| 安全等級IP54 (依據EN60204標準) protection class IP54 according to EN60204 | |
| 溫度范圍Operating Temperature range | 5-40°C |
| 電源要求Single phase | 230 V ± 10%; 50 Hz |
| 功率Power | 1500 VA |
| 相對濕度Relative humidity | 20~75 % |
實例應用：
所有評論僅代表網友意見，與本站立場無關。