Z4v7h-236 Nylon limit switch
Feature：
? Thermoplastic housing
? Oil resistance and petroleum products
? A large number of two - choice operating parts
? 30 mm x 58,5 mm x 30 mm
? Quick operation is to reach the switching point at an atmospheric pressure
? 1 Cable inlet M 20 x 1.5
? double insulation
? Just for positioning
? The joystick Angle can be adjusted by 10° at a time
? The operating head can be pressed 4 x 9
basic parameter：
Product model | ZV7H236-11z |
form | Standard type (quick-acting roller) |
inside switch | Quick switch, definitely off (contact combination :1 NO. /1 NC.) |
Rated voltage/current | 4A/AC230V，2.5A/AC400V，1A/AC500V |
Case | glass fiber reinforced thermoplastic, flame retardant |
Protection class | IP67 |
Contact material | silver |
Contact elements | Electrical separation, double breakpoint conversion contact |
Terminal | Screw connection, Max. 2.5mm (including cable terminal) |
Rated pulse resistance voltage Uimp | 6kV |
Rated insulation voltage Ui | 500V |
Use category | AC-15 |
Short circuit protection | Fuse 10A (delay) 16A (non-delay) as an affirmative disconnect limit switch: 6A (delay) |
Operating temperature | -30 to +80℃ |
Mechanical life | 20 million runs |
Z236 series | |
Contact disconnection distance | 2×2mm |
Switching time | ≤5ms, when the push rod speed is 10mm/min |
Remaining time | ≤3ms |
Operating speed | minimum 10mm/min |
Switching frequency | up to 5000 times/hour |
所有評論僅代表網友意見，與本站立場無關。