Performance of BTAD-CZ data acquisition card
1. BTAD-CZ Data Acquisition Card supports MODBUS RTU / MODBUS TCP / TCPIP / HTTP standard protocol;
2. suitable for industrial field power supply (24V DC, with the general PLC power supply);
3.the measurement signal range: ± 30Mv / 100Mv / 500Mv / 1V;
4. Resolution: 22-24Bit;
5.Temperature Coefficient: ≤5ppm / ℃ (typical);
6. the bare board size (length × width × height, mm);
7. has an analog to digital converter, digital calibration, tare, zero, zero tracking, zero power, anti-shake and other functions;
8.all the settings through the serial port to complete the work;
9.MODBUS address can be set (0 to 99), can be extended to bus communication;
10.MODBUS RTU baud rate, parity selectable (1200 ~ 38400bps), the data output format can be selected;
11. MODBUS TCP communication speed (10-100M), the data output format can be selected;
12. digital filtering: You can select the appropriate filter according to different occasions;
13.the measurement sampling rate selectable range 3.125 ~ 400Hz;
14. non-volatile memory parameters, the parameters after power is still preserved;
15.operating voltage: 24V DC power supply (6.5-12V DC power supply can be changed); Working current ≤40mA;
16. comprehensive protection features: anti-reverse, anti-over voltage, transient suppression of multiple protection;
17. temperature range: -40 ℃ ~ + 70 ℃; Storage temperature range: -60 ℃ ~ + 90 ℃.
所有評論僅代表網友意見，與本站立場無關。