鞋廠專用UVC能量計 真正德國 230-280nm 流水線消毒柜用 型號：UVC UV-Integrator140

UVC UV-Integrator140是一種高質量的紫外線測量儀器。當然我們主要應用在鞋機的殺菌消毒紫外線能量值的測試。當然其他只要是測試UVC紫外線殺菌燈都可以用這款。
原廠手柄式設計外觀，方便操作，抓握。這種UVC能量計可以很快判定燈管是否合格，對紫外線快速做出響應。這種UVC UV-Integrator140能量計尺寸比UVC UV-Integrator150大一倍左右，散熱更好，耐高溫強，數據穩定，使用壽命更長。

德國UV-DESIGN公司的UV能量計分以下幾種，購買時請注意選對型號，默認是發250-410nm全波段的UV能量計。

Item 9.1 UV-Integrator 140, Type 1, Diazo 350 – 460 nm
Item 9.2 UV-Integrator 140, Type 2, UV-A 315 – 400 nm
Item 9.3 UV-Integrator 140, Type 3, UV 250 – 410 nm
Item 9.4 UV-Integrator 140, Type 4, UV-B 280 – 315 nm
Item 9.5 UV-Integrator 140, Type 5, UV-C 230 – 280 nm
Item 9.6 UV-Integrator 140, Type 6, UV-V 395 – 445 nm
如果需要測試其他波段，可以向原廠提出定制要求。
因為UV能量計設計原理是通過增加曝光周期中的光量的發生率，計算出相對值。
由于紫外光源輻射分布不均勻，不同廠家的測量裝置結構不同，在相同的測量條件下會出現不同的

技術數據：
光譜范圍：250 - 410nm
測量范圍：0～5000毫瓦/厘米2
顯示：6位液晶顯示
顯示范圍：0至999999毫焦/厘米2
電源：長壽命3.6V鋰電池
消耗功率：100μA
電池使用壽命：10000小時
∅尺寸：∅ 5.5" (140 mm) height ?" (13 mm)
重量：約16盎司（450克。）
溫度范圍：0攝氏度至45攝氏度
防熱：背板隔熱板
基準精度：+-5%
在傳送帶上，UVC UV-Integrator140能承受110°C / 230°F達10秒。這個
外殼的溫度不應超過45°C / 113°F。

校準:
為了保持其功能和精度，建議每年重新校準一次。重新更換電池后也需要校準。目前，原廠出PTB校準證書

售后:
自購買之日起2年。電池部分保一年。電池為耗材。

The UV-Integrator 140 is a high quality UV measuring instrument. It is used to measure UV energy of different light
sources, especially on printing machines. It was specially designed with a recess in the housing for better handling.
It is ideal to ensure quality control of printing and drying processes.
Big size, heavy duty pass-through Integrator with a diameter of 140 mm. It is reliable and simple to use.
The UV-Integrator 140 is available in six different measuring ranges*:

(Please state upon order)
Item 9.1 UV-Integrator 140, Type 1, Diazo 350 – 460 nm
Item 9.2 UV-Integrator 140, Type 2, UV-A 315 – 400 nm
Item 9.3 UV-Integrator 140, Type 3, UV 250 – 410 nm
Item 9.4 UV-Integrator 140, Type 4, UV-B 280 – 315 nm
Item 9.5 UV-Integrator 140, Type 5, UV-C 230 – 280 nm
Item 9.6 UV-Integrator 140, Type 6, UV-V 395 – 445 nm
*further spectral ranges available upon request

By addition of the incidence of the light quantities during the exposure cycle, relative values are calculated.
Because of uneven radiation distribution of the UV light source and different type of construction of the measuring
devices by different manufacturers, different readings may appear under the same measurement conditions.
Technical Data:
Spectral range: UV 250 – 410 nm
Measuring range: 0 to 5,000 mW/cm 2
Display: 6-digit LCD
Display range: 0 to 999,999 mJ/cm 2

Power source: long life 3.6 V Lithium Battery
Power consumption: 100 μA
Battery service life: 10,000 hrs
Dimensions: ∅ 5.5" (140 mm) height ?" (13 mm)
Weight: approx. 16 ounce (450 grs.)
Temperature range: 0 to 45° Celsius
Heat protection: Heat shield on back plate
Base Accuracy: ± 5 %
While on the conveyer belt, the UV-Integrator 140 can withstａnd max. 110° C / 230° F for up to 10 seconds. The
temperature of the housing should not exceed 45° C / 113° F.

Calibration:
In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-
calibration will also be necessary after change of battery. Ongoing, PTB traceable calibration with certificate
Warranty:
2 years from the date of purchase, For the German quality battery we guarantee one year。

詳情請聯系業務：深圳市德勝興電子有限公司
劉小姐（微信同步）