中興T601,中興ZXDU68T601,中興室內48v600A,中興開關電源
興ZXDU68 T601電源系統是中興通訊第四代電源*有代表的產品。中興ZXDU68 T601電源系統的電源柜采用三相四線制交流供電，整流器供電為單相220Vac，額定輸出電流為50A；該組合電源系統有2m和1.6m兩種標準機柜，由中興ZXDU68 T601電源系統源柜的額定供電電流為600A，可以實現30A和50A整流器混插，方便維護。
一、中興ZXDU68 T601電源系統的監控單元無輸入電源
1．檢查監控單元的電源輸入端是否有電壓2．檢查監控單元的熔絲是否熔斷3．檢查監控單元的電源線插座是否插好
二、屏幕顯示混亂
復位監控單元，如果仍不能解決該故障，需要取下監控單元進行檢修
三、與監控后臺通訊中斷
1．檢查波特率、設備地址、是否配置正確2．檢查監控后臺與監控單元SCB板的X16（RS232）之間的通訊電纜是否接好3．若采用Modem通訊方式，需要檢查Modem的電纜和電源線是否連接好
四、中興ZXDU68 T601電源系統的整流器的狀態檢測和控制不正常
1．若1~6號整流器的狀態檢測和控制不正常，請檢查RSB板1是否插好2．若7~12號整流器的狀態檢測和控制不正常，請檢查RSB板2是否插好
五、交流數據或狀態顯示不正常
檢查監控單元SCB板的X3插頭是否插接好
六、直流數據或狀態顯示不正常
檢查監控單元SCB板的X17插頭是否插接好
七、電池溫度檢測不正常
檢查電池溫度傳感器與監控單元SCB板的X8，X9，X10之間的連線是否接好
八、干接點輸入檢測不正常
檢測輸入干接點與監控單元SCB板的X22之間的連線是否連接好
九、中興ZXDU68 T601電源系統的RLY板工作不正常
檢查RLY板與監控單元SCB板的X20之間的連線是否接好
十、中興ZXDU68 T601電源系統的監控單元指示燈不閃爍
復位監控單元
ZTE/中興 ZXDU68 T601 開關組合電源系統 現配300A 全新
**配置12個模塊，600A，現配300A，量大從優，運費實出
ZXDU68 T601組合電源系統
隨著運營商基站數量增加，其網絡能耗迅速增長。站點獲取也隨著環保理念的深入人心而日益困難，土地租賃成本隨之水漲船高。人力成本的日漸高漲，通信設備必須提高人機友好性以降低工程安裝及日常維護費用。為滿足用戶全面降低TCO的要求，中興通訊開發了ZXDU68
T601系列高效電源。
產品特點
一款高效率-48V室內組合電源系統，標準配置**33kW,并可根據用戶需要單柜擴展至105kW。包含更加豐富的外部接口：輸入輸出干接點、RJ45、RS232、RS485、USB，可以根據現場環境靈活組網。
系統采用效率高達96%的整流器，比傳統電源更加節省能耗，減少CO2的排放。
功率密度更高，機柜深度400mm，前接線前維護設計，減少占地面積和維護空間。
監控單元采用彩色屏幕，視覺效果更好，同時使用人性化的九宮格設計，操作更加便利。
用戶體驗
高功率密度，節省占地空間高達50%，減少站點租賃費用支出
80~300VAC寬輸入電壓范圍，提升電池使用壽命
-40~+70℃工作溫度范圍，野外適應能力更強，節省溫控設備的費用
采用高效率整流器，比傳統電源節省電能高達10%
監控單元通過USB接口，可以無限擴展監控的儲存能力，并可實現快速開局
ZTE ZXDU68 T601 power supply system is the most representative product of ZTE's fourth generation power supply. 1. Check whether the power input terminal of the monitoring unit has voltage 2. Check whether the fuse of the monitoring unit is fused 3. Check whether the power outlet of the monitoring unit is plugged in properly.
ZTE ZXDU68T601
1. ZTE ZXDU68 T601 power supply system without input power supply
1. Check whether the power input terminal of the monitoring unit has voltage 2. Check whether the fuse of the monitoring unit is fused 3. Check whether the power outlet of the monitoring unit is plugged in properly.
2. Screen display confusion
Reset the monitoring unit, if it still can't solve the problem, it needs to remove the monitoring unit for repair.
Interruption of communication with monitoring background
1. Check whether the baud rate, device address and telephone number are properly configured 2. Check whether the communication cables between the monitoring background and the SCB board X16 (RS232) are well connected 3. If modem communication mode is adopted, it is necessary to check whether modem cables and power cables are well connected.
4. Abnormal state detection and control of ZTE ZXDU68 T601 power supply system rectifier
1. If the state detection and control of No. 1-6 rectifier is abnormal, please check whether RSB board 1 is inserted properly. 2. If the state detection and control of No. 7-12 rectifier is abnormal, please check whether RSB board 2 is inserted properly.
5. Abnormal Display of Exchange Data or Status
Check whether the X3 plug of SCB board is plugged in properly
6. Abnormal display of DC data or status
Check whether the X17 plug of SCB board is plugged in properly
7. Abnormal Battery Temperature Detection
Check the connection between battery temperature sensor and SCB board X8, X9, X10
8. Improper input detection of dry contacts
Check whether the connection between input dry contacts and X22 of SCB board is well connected
9. The RLY board of ZTE ZXDU68 T601 power supply system is not working properly
Check whether the connection between RLY board and X20 board of SCB board of monitoring unit is good.
10. ZTE ZXDU68 T601 power supply system monitoring unit indicator does not flicker
Reset Monitoring Unit
ZTE ZXDU68T601
ZTE/ZTE ZXDU68 T601 switching combined power supply system is equipped with 300A brand-new genuine
** Configuration of 12 modules, 600A, 300A, large quantity, cost effective
ZXDU68 T601 Combined Power Supply System
With the increase of the number of base stations, the network energy consumption of operators increases rapidly. Site acquisition is becoming more and more difficult with the penetration of the concept of environmental protection, and the cost of lａnd leasing is rising. With the increasing cost of manpower, communication equipment must improve man-machine friendliness in order to reduce the cost of engineering installation and daily maintenance. ZTE has developed ZXDU68 to meet the requirement of reducing TCO in an all-round way.
T601 Series High Efficiency Power Supply.
Product characteristics
A high efficiency - 48V indoor combined power supply system, standard configuration ** 33kW, and can be extended to 105kW single cabinet according to user needs.
Including more abundant external interfaces: input and output dry contacts, RJ45, RS232, RS485, USB, flexible networking according to the field environment.
The system uses a rectifier with efficiency up to 96%, which saves energy consumption and reduces CO2 emissions more than traditional power supply.
Higher power density, 400 mm cabinet depth, front wiring maintenance design, reduce occupied area and maintenance space.
The monitoring unit uses color screen, which has better visual effect. At the same time, it uses humanized Nine-palace design, which makes the operation more convenient.
User experience
High power density, saving space up to 50%, reducing site rental costs
80-300 VAC Wide Input Voltage Range to Enhance Battery Life
- Working temperature range of 40 ~+70 C makes field adaptability stronger and saves the cost of temperature control equipment.
Using high efficiency rectifier can save up to 10% energy than traditional power supply.
Through USB interface, the monitoring unit can expａnd the storage capacity of monitoring indefinitely, and achieve a fast start.
更新時間：2019/11/28 11:04:57
所有評論僅代表網友意見，與本站立場無關。