Product description:

I. overview

Alternating current (voltage) is a transmitter can be measured AC current (voltage) into the instrument according to the linear ratio of the output DC voltage or DC current, widely used in electric power, telecommunications, petroleum, coal, metallurgy, railway, municipal and other departments of the electrical device, automatic control and scheduling system. AC current and voltage transmitter have single -, three - way combined structure:

1, high accuracy (typical: 0.2% best 0.05%).

2, the entire range has a very high linearity.

3, a high degree of integration, simple structure, excellent temperature characteristics and long-term stability of the work, so that the transmitter from the regular calibration.

Two, product name and model

Name

Model

Auxiliary power

Single AC current transducer

LSD-I, LSE-I, YWF-I, YWL-I

YWD series optional: AC:220V 110V

DC:220V 110V 48V 24V

YWE, YWF, YWL series optional:

DC:24V, 15V, 12V

Three combined AC current transmitter

YWD-3I, LSE-3I, YWL-3I

Single AC voltage transmitter

LSD-U, YWE-U, YWF-U, YWL-U

Three combined AC voltage transmitter

YWD-3U, YWE-3U, YWL-3U

Three, the implementation of standards

GB/T13850-1998idtIEC688:1992

Four, the main technical indicators

A) accuracy level: level 0.2, level 0.5

B) input, output and auxiliary power parameters

Vn

input voltage

V0

0 ~ 70V

V1

0 ~ 120V

V2

0 ~ 250V

V3

0 ~ 300V

V4

0 ~ 450V

V5

0 ~ 500V

V6

Custom user

An

Input current

A1

0 ~ 1A

A2

0 ~ 5A

A3

0 ~ 10A

A4

0 ~ 30A

A5

0 ~ 50A

Note:

A4, A5, A6, A7, A8

Products suitable for class YWF structures only.

A6

0 ~ 75A

A7

0 ~ 100A

A8

0 ~ 150A

A9

User defined

Pn

Auxiliary power supply

P1

DC24V± 15%

P2

DC12V± 15%

P3

AC220V± 15%

P4

Custom user

On

Output

O1

0 ~ 5V

O2

1 ~ 5V

O3

0 ~ 2OmA

O4

4 ~ 20mA

O5

Custom user

C) input frequency: 50Hz± 5Hz

D) overload input: current: 2 times continuous for 30 second

Voltage: 2 times continuous

E) absorption power: voltage loop: 0 5VA/450V

Voltage loop: 0.2VA/100V

Current loop: 0.1 VA/5A

F) response time: ≤ 350ms

G) output load: current: when auxiliary power supply ≥ 24V, RL≤ 650Ω;

When the auxiliary power supply for 12V, 15V, RL≤ 300Ω;

Voltage: RL≥ 2kΩ

H) power frequency withstａnd voltage: input / output / enclosure: AC 2kV/min

I) insulation resistance: ≥ 20MΩ

J) impulse voltage: 5kV/1.2-50μ s (peak)

K) working environment: temperature: -10 to 50 degrees Celsius humidity: 10 ~ 90% (no condensation)

L) storage conditions: temperature: -40 to 70 degrees Celsius humidity: 10 ~ 95% (no condensation)

And, lt;, FONT size=2>m) dimensions:

YWD-I, YWD-U: 55 mm× 75 mm× 120mm3

YWD-3I, YWD-3U: 110 mm× 75 mm× 120mm

YWE-I, YWE-U: 42mm× 75 mm× 70mm

YWE-3I, YWE-3U: 110 mm× 75 mm× 70mm

YWF-I, YWF-3U: 104 mm× 31 mm× 77mm

YWL-I (3I), YWL-U (3U): 75 mm× 22.5mm× 100mm

Five, wiring diagram

1, YWD series single AC current (voltage) / three combined AC current (voltage) transmitter

2 YWE series single AC current (voltage) / three combined AC current (voltage) transmitter

3 YWF series single alternating current (voltage) transmitter

YWF-I YWF-U

4 YWL series single AC current (voltage) / three combined AC current (voltage) transmitter

Note: 1, YWF, YWL series AC current transmitter input line from the transmitter shell set through the perforation, regardless of polarity.

2, YWD, YWE series current transmitter allows only less than 10A of the current, more than 10A, can only choose YWF-I type products.

Six, product debugging

1, YWD, YWE single AC current, voltage transmitter: to find corresponding to the transmitter panel corresponding to the ZERO and CAL two debugging holes

Inside the two potentiometers are zero and full adjustment potentiometer, adjust with a small screwdriver slowly rotating to the required accuracy can be.

2, YWD, YWE three AC current, voltage combination transmitter: find corresponding to the transmitter panel corresponding to ZEROA, CALA,

ZEROB, CALB, and ZEROC, CALC six debugging holes, the potentiometer in the A, B, C three, respectively, the zero and full adjustment potential

When the utility model is adjusted, the utility model can slowly rotate to the required precision with a small screwdriver.

Seven, installation

YWD, YWE series uses two types of DIN rail and screw installation, rail width of 35mm. Screw size is M4× 12 and M3× 12. YDF, YWL using DIN rail installation, rail width of 35mm.

Eight, ordering information

When signing the contract, please specify in detail the required models, specifications, corresponding to the selected models in the following format will be code to fill in, with a special specification.

Example 1:YWF-I-A4-P1-O1

YWF-I active single AC current transmitter

Input: AC 0 ~ 30A

Auxiliary power supply: DC 24V± 15%

Output: DC 0 ~ 5V

Example 2:YWD-3U-V3-P3-O4

YWD-3U active three voltage combined transmitter

Input: AC 0 ~ 300V

Auxiliary power supply: AC 220V± 15%

Output: DC 4 ~ 20mA

Nine, matters needing attention

1, input, output, auxiliary power wiring must be correct, can not be misplaced.

2, the use of the environment should be no conductive dust and non corrosive metal and the destruction of insulating gases exist, altitude less than 2500 meters.

3, the factory has been adjusted zero and precision, please do not adjust.