Product description:

I. overview

YWH-CRH humidity controller is a proportional control function of the controller (contact output). Can be set according to user requirements, the lower limit of humidity control points, and relay output. The utility model is an economical and practical humidity control device.

Two, product features:

1 France HUMIREL HM1500 humidity sensor. 2 high reliability and long term stability. 3 high resistance to chemicals.

Three, model:

YWH-CRH

Four, technical indicators:

Humidity control precision of 10~95%RH control ± 3%RH user specified minimum humidity humidity limit user specified control limit return difference: 5%RH: 5%RH (lower limit can be set according to user requirements) relay contact capacity is AC:220V (380) 7A response time < 5S auxiliary power supply P1:DC24V± 15% P2:DC12V± 10% 1W < the power surge voltage 5kV/1.2 ~ 50μ s working environment temperature: -30 to 60 DEG C, humidity: 10 ~ 95%RH configuration 72mm× 37mm× 200g 112mm; the weight of the product

Five, the use of instructions

1, wiring:

Humidity monitor work according to the following wiring

2, working mode

Humidity controller normal working hours, such as humidity in the upper and lower humidity, output relay does not move; if the humidity rises above the ceiling ceiling humidity control relay, normally open contact closure; if the humidity drops below the lower humidity, lower control relay, normally open contact closure.

Six, installation and maintenance

1, on-site installation

Shielded conductors for a electrical connections;

B wiring please do not touch the circuit and unauthorized adjustment potentiometer.

2, installation environment

A the use of the environment should be no conductive dust and corrosion of metal and the destruction of insulating gases;

B ambient temperature: -20 C ~ 60 c;

C altitude less than 2500 meters.

3, installation mode

On the wall, two screws spacing 82mm.