Product description:

I. overview

The broken line detector is a device for monitoring whether the long distance line is broken or not.

Two, technical indicators

1, broken line indicator: when the break occurs, the alarm indicator light, the relay contacts closed.

2, relay output: normally open contact, contact capacity: DC30V, 1A

3, working power supply: DC24V

4, the whole machine power consumption: 40mA (DC24V)

5, power frequency withstａnd voltage: input / output, input / power supply isolation voltage is not less than 2000V

The isolation voltage between the source and the output is not less than 1000V.

6, monitoring sensitivity: 6kΩ

7, size: 55 mm × 75 mm × 120 mm;;

8, installation: 35mm guide and the screw fixed in two ways

Three, model

S3-KL-J

Four, wiring mode

In order to ensure the safety of equipment, wire monitor terminal 2 must be grounded.

Five, matters needing attention

The use of the environment should be no conductive dust and non corrosive metal and the destruction of insulating gases exist, altitude less than 2500 meters.