U型鎖扣板產品簡介
U型結構陽光板除具有普通陽光板的優點之外,還解決了平面陽光板的繁瑣安裝過程,將不再使用不銹鋼或者鋁型材壓條和膠水粘合等環節,給施工人員帶來了輕便的工作流程。其采用的是“對扣式”與“搭扣式”設計,它大幅度的縮短了安裝周期,而且接縫處密封性能好,不易產生漏水現象。U型連接結構能滿足設計師想象力的設計要求,使其能擺脫材料局限,讓設計方案更美觀。廣泛用于多種采用平面或是彎曲設計的屋頂和覆層。
T字緊固件將U型陽光板系統夾住并固定到構件上,無需在板材上鉆孔。鋁制密封條封住板材的下端,防止灰塵進入。
鋁制F型材與板材的兩個邊接合到一起,完成整個結構的安裝。
C或鋁制連接件將板材連接到一起,連接件的兩端則用堵頭密封。
U型材(PC或鋁制)或鋁制F型材密封住板材的上端。
一、板材規格
U型板材采用多層結構,有8毫米、10毫米、18毫米和20毫米四種厚度。
標準U型陽光板雙面都有UV保護層(也可以定做成只有一面有UV保護層)。
板材長度可根據需求定做(標準長度:6000MM)
永信陽光板顏色有:透明陽光板,湖藍陽光板,草綠陽光板,茶色陽光板,乳白色陽光板,紅色陽光板,煙灰陽光板(特殊顏色可定做)
永信PC結構板材品類:通用型耐力板(單層板)、單(雙)面UV耐力板、阻燃陽光板、PC顆粒板、PC磨沙板、聲屏障透明隔音板、PC抗磨劃板、PC浪瓦,通用型陽光板(多層板)、單(雙)面UV陽光板、晶亮板、防滴露陽光板、易潔陽光板、防滴露+易潔陽光板、陽光板、PC雙層陽光板、PC蜂窩陽光板、PC四層陽光板、PC工程陽光板、PC工程耐力板、U型結構陽光板。
Product introduction of U-shaped lock buckle plate
In addition to the advantages of ordinary sunlight plate, the U-shaped structure sunlight plate also solves the cumbersome installation process of plane sunlight plate, and will no longer use stainless steel or aluminum profile strip and glue bonding, which brings a light workflow to the construction personnel. It adopts the "snap on" and "snap on" design, which greatly shortens the installation cycle, and has good sealing performance at the joints, which is not easy to cause water leakage. The U-shaped connection structure can meet the design requirements of designers' imagination, make it get rid of the limitations of materials and make the design scheme more beautiful. It is widely used in a variety of roofs and cladding with plane or curved design.
T-shaped fasteners clamp the U-shaped sunlight plate system and fix it to the component without drilling holes in the plate. The aluminum sealing strip seals the lower end of the plate to prevent dust from entering.
The aluminum f-section is joined with the two sides of the plate to complete the installation of the whole structure.
C or aluminum connectors connect the plates together, and both ends of the connectors are sealed with plugs.
U profile (PC or aluminum) or aluminum f profile seals the upper end of the plate.
1、 Plate specification
The U-shaped plate adopts multi-layer structure and has four thicknesses of 8mm, 10mm, 18mm and 20mm.
Both sides of the standard U-shaped sunlight plate have UV protective layer (or it can be customized that only one side has UV protective layer).
Plate length can be customized according to requirements (standard length: 6000mm)
Yongxin sunshine board has the following colors: transparent sunshine board, lake blue sunshine board, grass green sunshine board, Tan sunshine board, milky white sunshine board, red sunshine board and soot sunshine board (special colors can be customized)
Yongxin PC structural plate category: general-purpose endurance plate (single-layer plate), single (double) surface UV endurance plate, flame retardant sunlight plate, PC particle plate, PC sanding plate, sound barrier transparent sound insulation plate, PC anti-wear scratch plate, PC wave tile, general-purpose sunlight plate (multi-layer plate), single (double) surface UV sunlight plate, bright plate, anti dew sunlight plate, easy clean sunlight plate, anti dew + easy clean sunlight plate, sunlight plate, PC double-layer sunlight plate, PC honeycomb sunlight plate PC four layer sunlight board, PC engineering sunlight board, PC engineering endurance board, U-shaped structure sunlight board.












所有評論僅代表網友意見,與本站立場無關。